56S UVC LED Handheld Sterilizer User Manual

59S® UVC LED HANDHELD STERILIZER

X5User Manual

INTRODUCTION

This is a portable & rechargeable sterilizer, and very easy to use. It can kill bacteria at a sterilization rate of 99.9%. it’s clean, ozone-free to takes good care of your daily accessories!

1. Flip Panel
2. LED Indicator
3. Input Interface.
4. Children Safety lock.
5. Sterilizing Button.
6. UV LED Beads.

HOW TO USE

1. Please get it fully charged with a compliance adaptor of Output 5V =1k
2. Unlock the children safety lock to ‘ d’,then unfold the flip panel,
3. Wear the protective goggles firstly, and double click sterilizing button to scan back and forth 5-10 times as a whole sterilization cycle, an extra single click will stop sterilizing instantly.
4. Once sterilization completes, fold the flip panel and restore the children safety lock to ” 6 “.

APPLICATION

Sterilization for any of surfaces, such as hotel bedding, bathtubs, cribs, cushions, etc.

SAFETY PROTECTION

Built-in gravity sensing switch, it stops working automatically when the product turned over,

STERILIZING PRINCIPE

UVC LED light kills bacteria by destroying DNA or RNA, to stop them from reproducing and generating.

UVC LED DEODORIZATION

UVC waves can deodorize by decomposing the molecular structure of odor.

INTRODUCTION OF BACTERICIDAL FACTORS AND MICROORGANISM CATEGORIESThe main bactericidal factor and its intensity: UVC light, the average irradiance at a vertical distance of 0 cm and 1cm below the top UVC LED is respectively 20820W/cm and 622pW/cm; killing microorganisms: Escherichia coil, Staphylococcus aureus.

INDICATOR STATEMENT

SN	Working Status	Indicator
∗	Charging	Red Light Flickering
∗	Stand-by	White Light Dimming
∗	Working	White Light HigNighting
∗	Low Power	Red Light Flashes

VOICE REMINDER

“ding”	Sterilizing, Valid operation
Slight current	During sterilizing process

TECHNICAL PARAMETERS

1. Product Name: 59S’S2020-XSBAT UVC LEO Handheld Sterilize
2. Model: X5
3. Input: 5V= IA
4. UVC LED Beads: 20 pieces
5. Dimension: 257v42 ig 40mm
6. Net Weight: 210g
7. Wavelength: 260-280nm
8. Power Supply Interface: Micro USB
9. Discharge lime: 50 minutes
10. Battery ParametersNominal Voltage: 3.6VLimited Charging Voltage: 4.2VNominal Capacity: 2500mAhPower: 9Wh Standard: GB/T 18287-2013
11. UVC LED Lifespan: Up to 10,000 hours
12. Working Temperature: 0-40°C Storage Temperature: -20-55°C

PACKING LIST

1. Wand +1
2. USB cable+1
3. User Manual +1
4. Protective Goggles +1
5. Sterilization Test Report +1
6. Portable Storage Bag +1

WARM TIPS

1.  Please wear protective goggles before using them.
2. Use the compliance adaptor for the power supply, otherwise, the product will get damaged.
3. Fully charge the wand before using it.
4. Keep operation away from strong magnetic field objects.
5. Remove the musty smell of towels. It will be more obvious when you sterilize for a few times more according to the concentration of the odor.
6. Study the manual carefully and thoroughly, keep it properly.
7. In order to improve user experience, there will be changes in product features without prior written notice, please refer to actual contents in the package.

CHILDREN PROHIBITED DO NOT EXPOSE TO EYES & SKINNO TRAMPLING NO WASHING & SOAKING

NAME AND CONCENTRATION OF HARMFUL SUBSTANCE OR ELEMENTS

Part Names	Harmful substance or elements
Pb	Hg	Cd	Cr(VL)	PBDE	PBB	EFUP
Shell	0	0	0	0	0	0	10
PCBE	x	0	0	0	0	0	11
Battery	0	0	0	0	0	0	5
USB Cable	x	0	0	0	0	0	10

O: it means that the concentration of the toxic and harmful substance in 811 homogeneous materials of the component is in compliance with the limitation stipulated in GB/26572-201n

X: The concentration of the toxic and hazardous substances in certain homogeneous materials of the component exceeds the limitation specified in 68126572-2011Note: Components marked ‘X” stands for no alternative technologies or components available at this stage.

The EFUP refers to the safety lifespan of using the product without hazardous material leakage under the conditions specified in the manual.

For the battery: 5 years EFUP under normal use conditions.

For the product:10 years EFUP under normal use conditions.

WARRANTY

Warranty DetailsThank you for purchasing our product In order to offer you a good experience and protect your rights, we provide after-sales service in accordance with regulations& requirements by Mil and AOSIQ.The following circumstances are not covered by warranty:

• warranty expires
• Malfunction or damage resulted from failure to use, maintain or keep the machine as instructed by the User Manual.
• Disassemble the machine by customers without permission
• Malfunction or damage caused by human errors (such as misuse, collision or wrong voltage input)

Product model:——————-Date of purchase:—————–Dealer:—————————– Phone number:——————-User address————————–User name:—————————

This voucher serves as Important evidence to resort for after-sales service and shall be kept properly.

Manufacturer: Shenzhen UVLED Optical Technology Co, LtdAddress: Room 301. FL 3, Phase 1. Bang Ica Science and Technology Park, West of Bangka Road & South of Guanguang Road, Guangming HI-Tech Industrial Zone, Tangi la Community. Phoenix Street Admit Gu and ming District. Shenzhen. ChinaCommissioned Manufacturer: Shenzhen UV Guard Technology Co. Ltd.

Factory Address: 341/F. building 2A.No.9. Bang Kal Road, High-tech Industrial Park. Guangming District. Shenzhen, ChinaHygienic License: VWX22(2011:)-02-No 9142 Service Tel: 400930-7399 Post Code. 518132Executive Standard: ONCHC 002 https://www.59s.com/en/