8BitDo N30 Pro 2 Bluetooth gamepad Instruction Manual

N30- Pro 2 Bluetooth gamepadInstruction Manual

report this ad

  • press start to turn on the controller
  • press & hold start for 3 seconds to turn off the controller
  • press & hold start for 8 seconds to force turn off the controller

Switch

  1. press & hold Y & start to turn on the controller, LEDs will blink four times per cycle
  2. press & hold pair for 2 seconds to enter pairing mode, Blue LEDs will rapidly blink
  3. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LEDs will enter its breathing mode when connection is successful
  4. controller will auto reconnect to your Switch with the press of start once it has been paired
  • when connected to your Switch, star button = Switch Screen Shot button
  • home button = Switch HOME button

Android (D – input)

  1. press & hold B & start to turn on the controller, blue LEDs will blink once per cycle
  2. press & hold pair for 2 seconds to enter pairing mode, Blue LEDs will rapidly blink
  3. go to your Android device’s Bluetooth setting, pair with [8BBitDo N30 Pro 2]. LEDs will enter its breathing mode when connection is successful
  4. controller will auto reconnect to your Android device with the press of start once it has been paired
  • USB connection: connect the controller to your Android device via USB cable after step 1

Windows (X – input)

  1. press & hold X & start to turn on the controller, LEDs will blink twice per cycle
  2. press & hold pair for 2 seconds to enter pairing mode, Blue LEDs will rapidly blink
  3. go to your Windows device’s Bluetooth setting, pair with [8BitDo N30 Pro 2]. LEDs will enter its breathing mode when connection is successful
  4. controller will auto reconnect to your Windows with the press of start once it has been paired
  • USB connection: connect the controller to your Windows device via USB cable after step 1

macOS

  1. press & hold A & start to turn on the controller, LEDs will blink three times per cycle
  2. press & hold pair for 2 seconds to enter pairing mode, Blue LEDs will rapidly blink
  3. go to your macO$S device’s Bluetooth setting, pair with (Wireless Controller]. LEDs will enter its breathing mode when connection is successful
  4. controller will auto reconnect to your macOS device with the press of start once it has been paired
  • USB connection: connect the controller to your macOS device via USB cable after step 1

Turbo function

  1. hold the button you would like to set turbo functionality to and then press the star button to activate turbo functionality.
  2. to deactivate turbo function, hold the button with turbo functionality activated and press the star button to deactivate turbo functionality
  • analog sticks are not included
  • this does not apply to Switch

battery

status  LED indicator
low battery mode LEDs in red
battery charging LEDs in yellow
battery fully charged LEDs turn off
  • built-in 480 mAh Li-on with 18 hours of play time
  • rechargable via USB cable with1 – 2 hour charging time

power saving

  • 1 minute with no Bluetooth connection, will power off
  • 15 minutes with Bluetooth connection but no use, will power off
  • controller stays on and connected on wired USB connection

support

  • please visit support.8bitdo.com for further information & additional support

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,