10000mAh Mi Power Bank 2S
User Manual
Product Overview
Thank you for choosing 10000mAh Mi Power Bank 2S.This product is a high-capacity portable charger that uses Li-polymer battery, charge and discharge chip for a safe, efficient, and compatible user experience.
The Power Check button is not a Power button.10000mAh Mi Power Bank 2S detects charging and discharging automatically.The Power indicator goes off 2 minutes after fully discharged.
Safety: Mi Power Bank has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions.
Efficiency: Supports fast charging at 5.1V/2.4A, 9V/1.6A, 12V/1.2A only one output port used. The total power can be up to 15W when two output ports used together, at 5.1V/2.4A maximum output for each one.
Compatibility: The product has a built-in USB charging controller, compatible with most smartphones, tablets, and devices. It supports mainstream fast charging devices and can boost up to 9V/12V.
Quality: Li-polymer battery, charge and discharge chip.
Charging
Connect with Mi Power Adapter to charge Mi Power Bank.
The indicator shows charging conditions as follows:
Discharging
Connect with Mi Power Bank to charge your device.The indicator shows discharging conditions as follows:
Low-current discharge: when Mi Power Bank is not charging, double press the Power Check button to enter low-current discharge mode to charge small devices, such as Bluetooth headphones and smart bands. The indicator LEDs will turn on one by one in succession, indicating that Mi Power Bank is in low-current discharge mode. To exit low-current discharge mode, press the Power Check button.
Specifications
- Model: PLM09ZM Battery type: Li-polymer battery
- Capacity: 10000mAh 3.7V (37Wh)
- Rated capacity: 6500mAh 5.1V (TYP 1A)
- Operating temperature: 0°C~40°C
- Dimensions: 147 × 71.2 × 14.2 mm
- Input port: Micro-USB Output port: USB-A
- Input: 5.0V 2.0A/9.0V 2.0A/12.0V 1.5A
- Output: Single port 5.1V 2.4A/9.0V 1.6A MAX/12.0V 1.2A MAX
- Dual ports 5.1V 2.4A (15W MAX)
- Charging time: approx. 3.5 hrs (9V/2A or 12V/1.5A adapter, standard cable);
- approx. 5.5 hrs (5V/2A adapter, standard cable)
Note
- Make sure your Mi Power Bank is fully charged on its first use.
- When charging a device with Mi Power Bank, make sure your device displays the battery charging icon and the Mi Power Bank is working properly.
- When recharging Mi Power Bank or charging a device with Mi Power Bank, make sure you use a standard charging cable.
- If all indicators go off when charging a device with Mi Power Bank, recharge your Mi Power Bank shortly.
- When charging a device with Mi Power Bank, the device will use Mi Power Bank’s power first.
- Disconnect Mi Power Bank to avoid further discharge once your device is fully charged.
- When Mi Power Bank enters protection mode (LEDs remain off atter pressing the Power Check button) due to short circuit or other reasons, charge it with an external charger to resume.
Warning
Mi Power Bank contains Li-ion baery cell. Do not open the casing to avoid cell damage or other hazards.
Do not dismantle, crush, puncture and short circuit Mi Power Bank, or expose it to liquids, fire or environments where the temperature is above 60°C (140°F).
CE
Hereby,declares that this equipment is in compliance with the Electromagnetic Compatibility Directive 2014/30/EU.
Test standards:EN55032:2015 / EN61000-3-2:2014 / EN61000-3-3:2013 / EN55024:2010
Anti-counterfeit Label Instructions
Each Mi Power Bank comes with an anti-counterfeit label on the outer package.
Scratch the coating and go to http://chaxun.mi.com to check authentication
For further information, please go to www.mi.com
Read this manual carefully before use, and retain it for future reference.Manufactured for: Xiaomi Communications Co., Ltd.Manufactured by: Zimi Corporation (a Mi Ecosystem company)Address: A913, No. 159 Chengiang Middle Road, Jiangyin, Jiangsu, China
Downloads
10000mAh Mi Power Bank 2S Manual – 10000mAh Mi Power Bank 2S Manual –
[xyz-ips snippet=”download-snippet”]