Netgear GS110TPv3 / GS110TPP Pro Switch User Manual

Netgear GS110TPv3 / GS110TPP Pro Switch

8-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management (GS110TPv3)8-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch with 2 Copper Ports and Cloud Management (GS110TPP)

Package contents

  • Switch
  • DC Power Adapter (varies by region)
  • Rubber footpads for tabletop installation
  • Wall mount kit(The wall-mount screws are 6.5 mm in diameter and 16 mm in length)
  • Installation guideNote: For more information about installation, see the hardware installation guide, which you can download from www.netgear.com/support/.

Connect the switch

  1. Connect devices to the RJ-45 PoE+ network ports on the switch front panel.Use Category 5e (Cat 5e) Ethernet cables terminated with RJ-45 connectors to make Gigabit connections.Connect an RJ-45 port on the switch to a network that includes a DHCP server.Note: In a small office or home office network, connect the switch to the LAN port of a router that is connected to a modem.
  2. Power on the switch and wait two minutes.If you connected the switch to a network with a DHCP server such as a router, the switch is automatically assigned a new IP address. (The default switch IP address is 192.168.0.239.)

Check the PoE status

The switch provides PoE+ power on ports 1-8. The switch can supply up to 30W PoE+ (IEEE 802.3at) to each port, with a maximum PoE power budget of 55W (model GS110TPv3) or 120W (model GS110TPP) across all active PoE+ ports.

The PoE Max LED indicates the status of the PoE budget on the switch:

  • Off. Sufficient. More than 7W of PoE power is available.
  • Solid yellow. Less than 7W of PoE power is available.
  • Blinking yellow. At least once during the previous two minutes, less than 7W of PoE power was available.

Register with the NETGEAR Insight app

You can use the NETGEAR Insight app to register the switch.

Note: If the switch is connected to a WiFi router or access point and to theInternet and you connect your smartphone to the same WiFi network as the switch, you can use the NETGEAR Insight app to both discover the IP address of the switch in your network and register the switch with NETGEAR.

  1. On your mobile device, visit the app store, search for NETGEAR Insight, and download the latest version of the app.
  2. Open the NETGEAR Insight app.
  3. If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.
  4. Enter the email address and password for your account and tap LOG IN.Note: If your switch and smartphone are connected to the same network,after you log in to your account, the IP address of the switch displays in the devices list. Then, in the devices list, select the switch, tap the ADD DEVICE button, and continue with Step 7.However, if the switch does not display in the devices list, tap + in the upper right corner, and either tap Scan Network or continue with Step 6.
  5. Tap + in the upper right corner.
  6. Either use the camera on your smartphone to scan the bar code or QR code, or type in the serial number. Then, follow the onscreen instructions.
  7. Create or select a network location to add this device to.
  8. Follow the onscreen instructions to complete the registration of the switch.

Note: To complete the registration process and unlock full access to the localbrowser user interface (UI), your switch must be connected to a network with Internet access. Or, you can enter the registration key on the login screen of the local browser UI. For more information, see the following sections.

Get a registration key for offline access

If your switch is not connected to the Internet, you can use a registration key to unlock full access to the local browser UI. To get a registration key, you must register your switch. Visit www.mynetgear.comor use the NETGEAR Insight app. NETGEAR Insight Premium or Pro subscribers can use the Insight Cloud Portal. Log in to your account, register the switch using its serial number, and receive a registration key.

Log in to configure the switch

You can use the switch as a plug-and-play device or you can change the settingsby logging into the local browser UI.If you did not get a registration key (see Get a registration key for offline access), make sure that the switch is connected to the Internet. During the initial login, the switch must access a NETGEAR server before you can log in to your NETGEAR account and configure the switch.

Note: Before the initial login, if the switch is not connected to the Internetand you did not receive a registration key, you can log in with the local devicepassword (by default, password ), but only a limited menu is available. After you log in once with your NETGEAR account, with the switch still in its default management mode (Directly Connect to Web Browser Interface), you can log in with the local device password and the full menu is available, even if the switch is not connected to the Internet

  1. Open a web browser from a computer or tablet connected to the samenetwork as your switch.You can use a wired or WiFi connection.
  2. Enter the IP address of the switch.To discover the IP address of the switch, use the NETGEAR Insight app or another discovery method (see Other discovery and configuration methods).Your browser might display a security message. Ignore it or add an exception.The Register to unlock all features page displays. You can now register the switch.
  3. Click the Log in with NETGEAR account button, and follow the directionsonscreen to register the switch with your NETGEAR email address and password. If you obtained a registration key, you can enter it instead.Note: If you did not yet create a NETGEAR account, click the Create account link, follow the directions onscreen to create an account, and register the switch with your NETGEAR email address and password.
  4. Click the Login button.The System Information page displays. You can now configure the switch. For more information, see the user manual, which you can download from www.netgear.com/support/.

Change the management mode to Insight

By default, the management mode is set to Directly Connect to Web BrowserInterface, which lets you configure the switch from the local browser UI.You can change the management mode so that you can manage the switch remotely from the cloud with the NETGEAR Insight app or Insight Cloud Portal.

  1. While you are logged in to the local browser UI, in the Management Mode section on the System Information page, select the NETGEAR Insight Mobile App and Insight Cloud Portal radio button.
  2. In the pop-up window, click the OK button.
  3. Click the Apply button.
  4. In the pop-up window, click the OK button.Your settings are saved.The first time that you change the management mode to Insight, the switch is reset to its factory default settings, and you must configure the switch using the NETGEAR Insight app or Insight Cloud Portal.

Other discovery and configuration methods

The NETGEAR Switch Discovery Tool and the Smart Control Center Utility let you discover the IP address and configure the switch.

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads.You can also check out our NETGEAR Community for helpful advice at community.netgear.com.

Regulatory and Legal

(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/).For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.See the regulatory compliance document before connecting the power supply.For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.Do not use this device outdoors. The PoE source is intended for intra building connection only.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,