Panasonic RP-BTS35 Earphones User Manual

Table of Contents

Basic Owner’s Manual

Digital Wireless Stereo Earphones

Model No. RP-BTS35

Thank you for purchasing this product.Please read these instructions carefully before using this product, and save this manual for future use.

More detailed operating instructions are available in “Owner’s Manual (PDF format)”.To read it, download it from the website. http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/•Click the desired language.

Accessories

Please check and identify the supplied accessories.Only for U.S.A.:To order accessories, refer to “Limited Warranty” on the rear page.Only for Canada:To order accessories, contact the dealer from whom you have made your purchase.□ 1xUSB charging cord□ 1xEarpieces set (L, S)M-size earpieces are attached at the time of purchase.Caution: Use only the supplied USB charging cord when connecting to a computer.

About water resistanceIPX5 equivalentProtected against water jet. (Securely close the USB lid.)

Safety precautions

For the U.S.A. and Canada only

A lithium-ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.AND CANADA.This device complies with Part 15 of FCC Rules and Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of this device.FCC ID: ACJ-RP-BTS35Model: RP-BTS35IC: 216A-RPBTS35This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption ratio (SAR).

THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible Party: Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102-5490Support Contact: http://shop.panasonic.com/support

THE FOLLOWING APPLIES ONLY IN CANADA.CAN ICES-3(B)/NMB-3(B)

□ Unit

Avoid using or placing this unit near sources of heat.
Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites.

□ Earpieces

Keep the earpieces out of reach of children to prevent swallowing.
Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused.

□ Allergies

Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin.
Continued use may cause rashes or other allergic reactions.

This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

This unit is intended for use in moderate and tropical climates.

Maintenance

Clean this unit with a dry and soft cloth.•Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off.

Specifications

□ General

Power supply	DC 5V, 500mA(Internal battery: 3.7V(Li-polymer))
Operating time*1	Approx. 6hours
Charging time*2 (25oC (77oF))	Approx. 2hours
Charging temperature range	10°C to 35°C (50°F to 95°F)
Operating temperature range	0°C to 40°C (32°F to 104°F)
Operating humidity range	35%RH to 80%RH (no condensation)
Mass (Weight)	Approx. 21g (0.7oz)

□ Water resistant

Water-resistant – IPX5 equivalent

□ Bluetooth® section

Frequency band	2402MHz to 2480MHz
Supported profiles	A2DP , AVRCP , HSP , HFP
Supported codec	SBC

*1It may be shorter depending on the operating conditions.*2Time taken to recharge from empty to full.

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the checkpoints, or if the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” on the rear page if you reside in the U.S.A., or refer to “CONTACT INFORMATION” on the rear page if you reside in Canada.

The unit does not respond.•This unit can be reset when all operations are rejected. T o reset the unit, connect the unit to a computer using the USB charging cord. All the previous operations will be canceled. (The pairing device information will not be deleted.)

Cannot charge the unit.

Make sure the computer is turned on and is not on standby or sleep mode.
Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports.
If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.
If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery: Approximately 300.)

LED does not light during charging. / Charging takes longer.

Is the USB charging cord (supplied) connected firmly to the USB terminal of the computer? (→Rear page, B)
Make sure to charge in a room temperature between 10oC and 35oC (50oF and 95oF).

The power does not turn on.

Is the unit being charged? The power cannot be turned ON during charging. (→Rear page, B)

The device cannot be connected.

Delete the pairing information for this unit from the Bluetooth® device, then pair them again. (→Rear page,D)

No sound.

Make sure that the unit and the Bluetooth® device are connected correctly. (→Rear page, D)
Check if music is playing on the Bluetooth® device.
Make sure that the unit is turned on and the volume is not set too low.
Pair and connect the Bluetooth® device and the unit again. (→Rear page, D)
Check if the Bluetooth® compatible device supports “A2DP” profile. For details on profiles, see “Listening to music” (→Rear page, F). Also refer to the operating manual for the Bluetooth® compatible device.

Low volume.

Increase the volume of the unit. (→Rear page, F)
Increase the volume on the Bluetooth® device.

Sound from the device is cut off. / Sound quality is bad.

Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc.
The device may be out of the 10 m (33feet) communication range. Move the device closer to this unit.
Remove any obstacle between this unit and the device.
Switch off any wireless LAN device when not in use.
A communication problem may arise if the battery is not fully charged. Charge the unit. (→Rear page, B)

You cannot hear the other person.

Make sure that the unit and the Bluetooth® enabled phone are turned on.
Check if the unit and the Bluetooth® enabled phone are connected. (→Rear page, D)
Check the audio settings of the Bluetooth® enabled phone. Switch the calling device to the unit if it is set to the Bluetooth® enabled phone. (→Rear page, D)
If the volume of the other person’s voice is too low, increase the volume of both the unit and the Bluetooth® enabled phone.

Cannot make a phone call.

Check if the Bluetooth® compatible device supports “HSP” or “HFP” profile. For details on profiles, see “Listening to music” and “Making a phone call” in “Owner’s Manual (PDF format)”. Also refer to the operating manual for the Bluetooth® enabled phone.

The serial number of this product can be found on the tag.Please note them in the space provided below and keep for futurereference.MODEL NUMBER __________RP-BTS35 ______________SERIAL NUMBER__________________________________

User memo:DATE OF PURCHASE _________________________DEALER NAME ______________________________DEALER ADDRESS___________________________TELEPHONE NUMBER________________________

A Part names

a Right earphoneb Remote controllerc Left earphone1. Clip 2. USB lid 3. Cord adjuster 4. Raised dot indicating the left side 5. Earpiece 6. Microphone 7. LED indicator light* 8. Charging terminal (DC IN)9. [+] button :[] button ;[–] button*Hereafter referred to as “LED”

B Charging

The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.Connect this unit to a computer ( c) using the USB charging cord (supplied) ( b).

Within approximately 3seconds after the connection is established, the LED on the right earphone will light in red.
The LED ( a) lights in red when charging is in progress. When charging is completed, the LED will go out.
Charging will take approximately 2hours from empty state to fully charged. (Quick charging time for 70minutes operation: Approx. 15minutes)
The power cannot be turned on while charging.
Do not use any other USB charging cords except the supplied one.
When the battery level is low during use of the unit, the blue blinking LED will change to red. A beep will sound every 1 minute.When the battery runs out, the power will turn off.

C Turning the power on/off

Press and hold [Φ] ( b) of this unit for approx. 3seconds until the LED (blue) (a) blinks.•A beep will sound and the LED on the right earphone will blink.To turn the power offPress and hold [Φ] for approximately 3seconds. A beep will sound and the power will be turned off.

• If the unit is not connected to a Bluetooth® device, the unit will beep and turn off automatically approximately 5minutes after you have stopped using it. (Auto power off)

D Connecting a Bluetooth ® device

□ Bluetooth® pairing

1 In the power-off state, press and hold [Φ] of this unit until the LED blinks in blue and red alternately.2 Select “RP-BTS35” (a) from the Bluetooth® device’s menu.• If prompted for a passkey, input the passkey “0000 (four zeros)” of this unit.• When the LED (blue) blinks twice every approx. 2seconds, pairing (registration) is completed. (Connection established)

□ Connecting a paired Bluetooth® device

1 Turn on this unit.2 Perform steps 2 of “Bluetooth® pairing”. (→above)• When the LED (blue) blinks twice every approx. 2seconds, pairing (registration) is completed. (Connection established)

E How to wear the earphones

F Using the earphones

Connect the Bluetooth® device and the unit.□ Listening to musicSelect and play the music on the Bluetooth® device.•The selected music is output to the earphones of the unit.□ Remote controlling (Available only if your Bluetooth® device supports “AVRCP”) (Operation example)

Play / Pause: Press [Φ].Increase the volume: Press [+].Decrease the volume: Press [–].Forward to the start of next track: Press and hold [+] for approximately 2seconds.Return to the start of current track: Press and hold [–] for approximately 2seconds.

□ Making a phone call1 Press [Φ] on the unit and answer the incoming call.2 Start talking.3 Press [Φ] to end the phone call.• (HFP only) Reject a call / Change the call device: Press [Φ] twice quickly.• You can have a phone conversation using the microphone of the unit by making a call from the Bluetooth® enabled phone.

□ Restoring to the factory settings1 While the unit is turned off, press and hold [Φ] for at least 5seconds until the LED starts blinking alternately in blue and red.2 While the LED is blinking alternately in blue and red, press and hold [+] and [–] at the same time for at least 5seconds.• The LED will blink fast in blue. The unit will restore to the factory settings.

G To remove the battery when disposing of this unit

The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled.• When disposing of this unit, take out the battery installed in this unit and recycle it.

□ DangerAs the rechargeable battery is specifically for this product, do not use it for any other device.Do not charge the removed battery.

Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.
Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it.
Do not let the wires touch any other metal or each other.
Do not carry or store the battery with a necklace, hairpin, or the like.

Doing so may cause the battery to generate heat, ignite, or rupture.

□ WarningDo not place the removed battery, and other items within reach of infants.Accidental swallowing of such an item may have an adverse effect on the body.•In the event that you think such an item has been swallowed, consult a doctor immediately.In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare hands.Fluid entering into an eye may cause loss of eyesight.•Wash the eye with water immediately without rubbing it, and then consult a doctor.Fluid getting on your body or clothes may cause inflammation of the skin or injury.•Sufficiently rinse with clean water, and then consult a doctor.A lithium-ion polymer rechargeable battery is built into the left earphone.Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure, and remove the internal rechargeable battery.• Disassemble after the battery runs out.• When disposing of the battery, please contact your local authorities or dealer and ask for the correct method of disposal.

Hold the top of the left earphone (L), and put a straight-slot screwdriver (commercially available) under the upper cover a.• Make sure to keep fingers away from the tip of the screwdriver.• Select a screwdriver to be large enough for a space under the upper cover.
Use the screwdriver for leverage, and push the upper cover a upward.• Be careful not to touch the battery with the screwdriver.
Hold the battery b, and remove it.
Pull off the battery b and separate it from the left earphone by cutting off the wires, one by one, with scissors.• Insulate the wire parts of the removed battery with cellophane tape.• Do not damage or dismantle the battery.

Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102-5490http://shop.panasonic.comPanasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3www.panasonic.com© Panasonic Corporation 2017Printed in China/Imprimé en Chine/Impreso en China

Panasonic Corporationhttp://www.panasonic.com

If you have any questions, visit:In the U.S.A.: http://shop.panasonic.com/supportIn Canada: www.panasonic.ca/english/supportPour toute assistance supplémentaire, visitez : www.panasonic.ca/french/support

300404130641E01-PPTQBM0175-1F0917HA2030

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-14

Panasonic

admin

Tags:

BTS35 PP, Panasonic, RP-BTS35, TQBM0175