Instruction Manual
Keycode: 42895831
*Please read all the information carefully before you use the product and keep the manual for future reference.
1. Specification:
- Sensing module 90 degrees rotation
- 4 white LED light
- 3*AAA battery (not included )
2. Structure Description:
- Sensing module 90 degrees rotation
- 4 white LED light
- 3*AAA battery (not included )
3. Installation Description:
- Stick the plastic clips with 3M glue to the cupboard or closet.(Note: the lamp bar is placed on the right side of the entrance)
- Then push the lamp into the plastic buckle as the direction shown in the above picture.
4. Direction For Use
- Place the battery correctly and close the battery cover,
- Set the switch to “AUTO”, the LED light goes into motion detect mode. When in a dark area, once a person or animal enters the sensing area, the light will turn on for 30 seconds.
- Set the switch to “ON” for Always on mode
- Set the switch to “OFF” when not in use.
5. Detection distance
- Within 3meters and 100°
6. Attentions
- This product should be used indoors, please do not use it in direct sunlight, rains, or heavy moisture.
- The sensor will not work beyond its sensing range Battery life is a rough figure, it will be different depending on the frequency and time of use, battery life from different brands will also be different.
- Please check for battery regularly. Remove the battery when not for use in a long period.
- Old and new battery should not use at the same time.
- Difference type of battery should not mixed.
[xyz-ips snippet=”download-snippet”]