Single Channel Universal Battery Charger
User Manual
MB-3705
Box content:
1 x Battery Charger
1 x Micro B Power Cable
Product Diagram
Operation:
- Insert the USB micro B power cable in to a suitable 5VDC USB mains power adaptor (not included) or a suitable USB port such as a computer.
- Insert the USB micro B plug from the USB power cable to the USB power socket located on the rear of the battery charger.
- The LED will flash green and red alternatively indicating that it is powered correctly.
- Insert a Lithium ion (Li-ion) battery into the charging slot.
- Once a battery has been inserted; the LED will change to red indicated it is charging.Note: If the red LED is flashing then it indicates reverse polarity, short circuit or a bad battery.
- Once the battery is fully charged; the LED will change to green.
LED Status Indicator:
| LED: | Description: |
| Green & Red Flashing |
Power Connected
|
| Green On |
Battery Charged
|
| Red On | Charging |
| Red Flashing |
Reverse Polarity, Short Circuit, Bad Battery
|
| Red Flashing Fast |
Mains Power Too Low
|
Troubleshooting:
| Problem: | Solution: |
|
Battery Won’t Charge
|
Connect to a suitable USB charging source such as a USB mains power adaptor or USB charging port and make sure it’s correctly turned on.
|
|
Make sure the battery is the correct Li-ion type according to the specifications
|
|
|
Make sure the battery is in working order and not completely damaged.
|
|
|
No Power/ LED
|
Ensure the USB charging cable is connected properly to a USB charging port or USB charging adaptor.
|
|
Check to see if your USB power source is working correctly
|
Safety:
- Do not open the case of this product to prevent the unit from damage.
- Keep the battery charger away from high temperatures as it may damage the device.
- Do not expose the battery charger to water or liquids to prevent the unit from damage.
- Please disconnect the battery charger from power when not in use.
- This battery charger is for indoor use only.
Features:
- Short Circuit Protection
- Zero Volt Battery Activation
- Reverse Polarity Protection
- Over Charge Protection
Specifications:
Input: 5VDC, 1A Output: 4.2V, 1A (Battery Above 0.65mm)/0.5A (Battery Below 0.65mm) Battery Compatibility: 10440, 14500, 16340, 17335, 17670, 18490, 18650, 22650, 26500, 26650 Supported Battery: 3.6-3.7V Li-ion Protection Voltage: 4.2V+0.05V Dimensions: 100(L) x 32(W) x 28(D)mm
Distributed by: Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere
[xyz-ips snippet=”download-snippet”]