nedis HDMI Switch User Guide

Table of Contents

nedis HDMI Switch

Intended use

The Nedis VSWI3482AT switches between 2 HDMI signals, depending on the configuration.The product is exclusively intended for switching between HDMI signals using the switch button.Configuration A allows the user to switch between 2 different source devices on a single display.Configuration B allows the user to switch between 2 different display with a single source device. The product is not intended for professional use. Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product	HDMI Switch
Article number	VSWI3482AT
Dimensions (l x w x h)	51 x 48 x 20 mm
Resolution	Up to 4K2K at 60 Hz
Data rate	5.4 Gbps
HDMI type	HDMI 19 pin female

Main parts

(image A)

1 HDMI port Button Status indicator LED 2 HDMI ports

Safety instructions

WARNING

Only use the product as described in this document.
Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not open the product.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
Do not expose the product to direct sunlight, naked flames or heat.
Place the product on a stable and flat surface.
Keep the product out of reach from children.
Make a backup of your data prior to first use.

Connecting the product

Make sure all the devices you want to connect have been switched off. Depending on the configuration you want to use, follow one of these instructions accordingly. In configuration B, only one monitor can be used simultaneously.