W9.1Quick Start Guide
PACKAGE CONTENTS
- LAMAX W9.1 action camera
- Case, waterproof up to 40 m
- Remote control, waterproof up to 2 m
- Li-ion battery
- Micro USB cable for charging /transferring files
- Microfibre cloth
- Mounts
INTRODUCTION TO THE CAMERA / CONTROLS
A. POWERB. REC buttonC. MODE buttonD. Door to micro USB and micro HDMI connectorsE. Door to battery and microSD card slotF. Thread to attach the camera to a tripod or selfie stickNote: To avoid damaging the camera, only use the recommended accessories.Camera controls
| Turn on and off | Hold down the POWER button or drag your thumb down and then press the POWER icon |
| Quickly change between photo/video mode | Drag your thumb to the side or press the MODE Button |
| Select a mode | Touch the icon or drag your thumb up to select the desired mode |
| Settings | Touch the icon |
| View files | Touch the icon  |
| Switch between displays | Hold down the MODE button |
USING THE CAMERA FOR THE FIRST TIME
A. Inserting the battery
- Press the lock button at the bottom of the camera. Slide the door outwards and open it.
- Insert the battery into the compartment with the battery and camera connectors on the same side.
- Close the door again.
B. Connecting the camera to the power
- You can charge the camera either by connecting it to a computer or using an optional AC adapter.
- It takes approximately 4.5 hours to charge the battery from 0 to 100 %.
- The charge indicator turns off after charging.
- Note: Charging the battery from 0 to 80 % takes 2.5 hours.
C. Insert the microSD card into the camera as shown (connectors toward the lens)
- Insert the card only when the camera is turned off and not connected to the computer.
- Format the card directly in the camera itself the first time you use it.
- We recommend memory cards with a higher write speed (UHS Speed Class – U3 and higher) and a maximum capacity of 128 GB.Note: Only use microSDHC or SDXC cards from reputable manufacturers. Generic cards do not guarantee the proper functioning of the data storage.
WIFI APPLICATION
Thanks to the mobile app, you will be able to change camera modes and settings or view and download recorded videos and photos directly to your mobile device.A. Scan the QR code to download the application iSmart DV Or search for the LAMAX app on the App Store / Google PlayB. Install the application on your mobile deviceC. Turn on WiFi on the camera by pressing the POWER button or touch the „WiFi“ icon which can be found by clicking on the icon.D. On your mobile device, connect to the WiFi network with the camera’s name. The WiFi password is displayed on the camera screen (factory setting is 1234567890).
FURTHER INFORMATION
For complete instructions, firmware updates and the latest news about LAMAX products scan the QR code.http://www.lamax-electronics.com/lamax-w91
References
[xyz-ips snippet=”download-snippet”]