CANYON Wireless Sport Headset User Guide

CANYON Wireless Sport Headset User Guide

 

 

Package Content

  1. Earphones
  2. Quick Guide
  3. 2 additional sized earcups.

Battery Charging

Before use, charge fully the battery using the attached USB cable The Red LED is on shows that the battery is charging; Blue LED is on after full battery charging. The sound alarm is provided for the low battery voltage.

Switching ON/OFF

Switching ON: Press the central button for more than 2 seconds.Switching OFF: Press the central button for more than 3 seconds.

Bluetooth Interface

  • Long press the central button for 2 seconds to power ON, and then enter the pairing status after 2 seconds directly (no extra operation), the light keep blinking.
  • Go to Bluetooth settings of the phone, tablet or other Bluetooth® audio device and select Canyon BT headset. If the device requests a password, enter 0000 After connection, the LED starts flashing blue.

Music Playing

Select a track, style or an artist on your phone, tablet or other Bluetooth audio devices.

  • Press the central button to start or pause.
  • To select previous/next track, long press -/+ buttons.
  • To reduce/increase the volume, shortly press -/+ buttons once.

Hands-Free Mode

You can answer or end a call by short pressing on the central button.You can decline a call by pressing the central button during 2 seconds.To make a call to the last saved number press twice the central button.

Troubleshooting

Fault Remedy
The Bluetooth device cannot connect Ensure that the earphones is not discharged. Ensure that the devices are connected and the Bluetooth function in your device is ON.Remove the earphones from a list of connected devices and reconnect. Switch the earphones off and then switch it on again. Ensure that the earphones is specified as a sound output device (settings in your playing back device). Reset to factory settings and reconnect.
Distorted sound playing back Move the earphones closer to the device. Check availability of wireless signals, which can make interferences, near your earphones and device.Adjust the sound volume on your earphones and device. Switch the earphones off and then switch it on again. Reset to factory settings and reconnect.

If the above actions cannot solve your problem, contact the support service at Canyon http://canyon.eu/ask-your-question/

SAFETY INSTRUCTIONSRead and follow all instructions before the product use.

  1. Protect the device against the high humidity as well as water and dust penetration. Do not use the device in very humid and dusty premises.
  2. Protect the device against heating: Do not use it near heating devices and avoid direct sunlight.
  3. The product shall be connected only to a corresponding power source. The type of the corresponding power source is specified in the operating manual.
  4. Never spray liquid detergents. Use only dry clothes for device cleaning.

WARNINGS

  1. The use of the earphones cannot be used with the high volume level within a long time period can result in the temporary or continuous hearing loss.
  2. The device dismantling is prohibited. We do not recommend to carry out any repair of this device. Unauthorized repairs result in warranty loss.

WARRANTY:

The warranty period begins from the date of the product purchase from an authorized CANYON DEALER. The date specified in your sales receipt or delivery note is the purchase date. During the warranty period, any repair, replace or repayment of a purchase value is made at the discretion of CANYON. To provide the warranty service, the product shall be returned to the Dealer’s purchase location together with its proof of purchase (sales receipt or delivery note). The warranty period is 2 years after the product purchase by a customer. Service life: 2 years. For use and warranty details, visit http://canyon.eu/warranty-terms/

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,