mpow Neckband Wireless User Manual
We are appreciated for purchasing our new Mpow Focus product This guide contains instructions for setting up and using your Mpow Focus easily.
Package List
Diagram
Click ANC button to tum on or off Active Noise canceling function.
Power ON/ OFF
How To Pair
First use
- Tum on the Bluetooth function on :,our phone.
- Power it on, then it will enter the pairing mode automatically. Red and blue lights will start flashing alternately with the voice “Pairing”.
- Search for the Bluetooth devices and select “Mpow Focus”(Enter the code ‘0000” if needed)
- When pairing is successful, the blue light will start flashing slowly. You will also hear the voice “Connected”.
Pair to another device
- In the state of shut-down, hold on the MFB for 5-7 seconds or so. Do not release it until the red and blue lights start flashing alternately with the 1.0ice “Pairing”.
- The rest goes the same as above.
Play/ Pause/ Answer/ Hang Up/ Reject/ Redial/ Activate Siri
Volume Control/ Music control
Charge Battery
Correct Disposal of This Product
( Waste Electrical & Electronic Equipment )This Marking shown on the product or its literature. indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household user should contact either the retailer where they purchased this product or their local government office. for details of where and how they can take this item for environmentally safe recycling
Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.
FCC Statement
Operation is subject to the following three conditions:
- This device may not cause ha1111ful interference, and
- This device must accept any interference received. including interference that may cause undesired operation.
- This device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ha1111ful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures,
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.
Notification
- Please fully charge it if it was going to be lain idle for a long time and place it in a cool and dry place. Please recharge it each 2 months for storage.
- Please fully charge it for the first use.
[xyz-ips snippet=”download-snippet”]