SYNCA Foot-Calf-Lumbar-Ottoman Massager User Manual

SYNCA Foot-Calf-Lumbar-Ottoman
Massager User Manual

Please read this manual thoroughly before using the unit. Keep this manual on hand for easy reference.http://www.synca-wellness.com

Thank you for purchasing the massager. Please read this manual thoroughly before using the unit. Be certain to read the section on “IMPORTANT SAFETY INSTRUCTIONS” to ensure correct methods of usage. Keep this manual on hand for easy reference.

IMPORTANT SAFETY INSTRUCTIONS

  • Read these “Important Safety Instructions” before use and use this product properly.
  • These important safety instructions are prescribed to ensure correct usage of the product, and to prevent injury and damage to the user and other persons.
  • Followings are the display and contents.

Part Names and Functions

Product Components

WARNING

  • Do not stand or put heavy objects on the unit to avoid malfunction or injury.
  • Under no circumstances, should you stand on or in appliance. Use only while seated.
  • Do not move the unit by pulling the power cord or dragging the unit to avoid injury or damage.
  • When the unit is not in use, always turn off the power and unplug the unit. Keep children away from the unit.

DANGER

  • Use only the supplied power adaptor to power or charge the product.
Control panel

WARNING

  • Do not spill water or other liquids on the control panel.
  • Do not press and hold the button too hard to avoid program errors.
Key Functions

(Each button comes with a LED indicator)

WARNING

  • If a power failure occurs when the product is in use, turn off the power switch and unplug the power cord.
  • Do not put hands or fingers close to and into the gap to avoid injury.
  • Do not let children and pets play around the product to avoid accidents.
  • Do not use the product at no load to avoid wearing the cloth cover.

Instructions

Preparation before use
  • Place the product horizontally on the flat surface.
  • Keep the product away from audio/video devices such as TV or radio at least 1 meter to prevent from signal interference.
Instructions

Step 1: Wire connectionPlug the adaptor into the power outlet. (Do not use the unit on other than the designated voltage).

WARNING

  • Before connecting the adaptor to the socket, make sure the power cord and plug are not damaged.
  • Do not plug in the plug with wet hands.

Step 2

  • Lift off the lid.
  • Put your feet into the foot and calf massager while seated.

Step 3

  • Press POWER ON/OFF button on the control panel of the foot and calf massager, select the desired massage.
  • Press POWER ON/OFF on the wireless lumbar massager; slide it behind you to enjoy the massage.
After use
  • Turn off the power switch on the control panel.
  • When the unit is not in use, always unplug the unit from the outlet.

Maintenance and Storage

Maintenance

Clean

  • Before cleaning, make sure the power switch is turned off and the power plug is unplugged from the outlet.
  • Wipe the surface of the product with a soft dry cloth.
  • If the product is dirty, wipe the unit with a dry cloth moistened in diluted neutral detergent or water and thoroughly wrung out, and then use a dry cloth to wipe the unit again. Thereafter, allow the unit to dry naturally.
  • Do not pull the zipper too hard when removing the detachable cloth cover to avoid damage. Wash the cloth cover with a neutral detergent.

WARNING

  • Do not plug in the power plug with wet hands.
  • Do not rinse the product with water or get water or other liquids inside of the product.
  • Do not use benzene, thinner, alcohol, solvents or abrasives to avoid scratch, discoloration or cracks on the surface.

Maintenance

  • Prior to the maintenance work, make sure to power off the product and disconnect the power plug from the outlet.
  • Keep the unit clean and away from humidity and high temperature environment to avoid moisture and dust.
  • When the unit is not being used for a long period of time, place a cover over the unit to protect it from dust.

WARNING

  • Do not place the unit in areas exposed to direct sunlight, or near heaters, hot air blowers or any other heating devices to avoid discoloration or deterioration on the surface of the holster.

TipsAlways pay attention to the following when the product has been used for years:

  • Scorched smell.
  • When the power cord is touched, the power is sometimes on and sometimes off.
  • The power cord is hot.
  • Other anomalies.

DANGER

  • Stop using the product to prevent from malfunctions and accidents if above situation is observed.
  • Turn off the power switch, unplug the power cord and contact the dealer or its service agent.
  • Do not disassemble and repair the product by yourself.

Troubleshooting

Contact the dealer or its service agent if the problem still persists after checking in accordance with troubleshooting.

WARNING

  • There is battery inside the product, pay attention to the following:
    • Risk of fire and electric shock.
    • For dry location use only.
    • Do not short circuit.
    • Do not disassemble or reassemble this device.
    • Do not use it without instruction.
  • Follow local government regulations to dispose electrical appliances properly. Prior to dispose electrical appliances, battery should be removed. Dispose of battery safely.

Specifications

Product: rei Foot-Calf-Lumbar-Ottoman MassagerModel: FM250Rated voltage: 24V ∼Rated power: 45WRated time: 15 minutesAdaptor model: XH2400-2500Adaptor input: 100-240V~, 50/60HzAdaptor output: 24V ∼ 2.5ABattery capacity: 2600mAhBattery charging time: 3~5 hoursBattery run time on a full charge: 55 minutesProduct dimension: L476 x W461 x H474 mmProduct weight: 14.3KGMaterials: PVC, ABSCountry of Origin: ChinaSafety design: ▣

WARNING

  • For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before using the Appliance.

DANGER – To reduce the risk of electric shock:

Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

  1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
  2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
  3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.WARNING – Keep children away from extended foot support
  4. Use this appliance only for its intended use as described in this manual. Do not use attachment not recommended by the manufacture.
  5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
  6. Do not carry this appliance by supply cord or use cord as a handle.
  7. Keep the cord away from heated surfaces.
  8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
  9. Never drop or insert any object into any opening.
  10. Do not use outdoors.
  11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
  12. To disconnect, turn all controls to the off position, than remove plug from outlet.
  13. The appliance is intended for household use.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: Use heated surfaces carefully. May cause serious burns. Do not use over insensitive skin areas or in the presence of poor circulation. The unattended use of heat by children or incapacitated persons may be dangerous.

SAVE THESE INSTRUCTIONS

SERVICING OF DOUBLE-INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding.

No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product.

Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel.

Replacement parts for a double-insulated product must be identical to the parts they replace.

A double-insulated product is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.”

The symbol (square within a square) may also be marked on the product. ▣

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by