BLAUPUNKT 2-IN-1 Vehicle Tracking System Dvr Installation Guide

Table of Contents

BLAUPUNKT GT320D Operating and Installation Instructions

2-IN-1 VEHICLE TRACKING SYSTEM with DVR

CAUTIONS

Safety Notes

This device has been manufactured according to established safety guidelines. However, dangers may still occur if the safety notes in this manual is not observed. This manual is intended to familiarize the user with the device’s important functions. Read this carefully, prior to using the device. Keep this manual in an easily accessible location. In addition, do observe the instructions of the devices used in conjunction with this device.

Attentions

This device is intended for installation and operation in a vehicle with 12V and 24V vehicle system voltage.
Please insert the micro SD card in the right direction to avoid damage to the card or the device. If device shows error message, please format the micro SD card from device menu. Please reset device or change micro SD card if similar error continues.Note : All files will be deleted when formatting micro SD card or firmware update, please backup the important files prior to that. When reset function is selected, the device will return to default setting.
Ensure bracket is installed correctly & firmly on windscreen to avoid damage to device and for better recording angle.
Please do not record or take picture facing sunlight.
To obtain clear image, please clean windscreen and device lens regularly. Avoid using device in dusty environment.
Handle device with care and avoid direct impact on the device. Avoid using device in high electromagnetic environment.
Keep the device away from children.
Keep the device away from flammable areas or liquids.
The device should be stored in dry and low humidity place.
Please operate the product within the temperature of -20°C ~ 80°C. Continuous exposure to sunlight, especially when locked in cabin where temperature exceeds 80°C may result to device malfunction, colour change, housing and image distortion.
Weak signal or signal interference of device can arise from obstacle locations such as underground parking.
For abnormalities, please refer to the “Troubleshooting” section. Consult with Blaupunkt dealer for further assistance, in case if the problem cannot be resolved.

This manual may be updated from time to time without any notice. Visit www.blaupunkt.com/ase for latest info.

Disclaimer

Blaupunkt is not liable for any loss or damage caused or resulting from unauthorized disassembly or modification to the product.
In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages to property or life and whatsoever arising out of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.
This device is NOT intended to be used for illegal purpose, surveillance and shall not be used in any form as evidence for claim purposes.
Some countries prohibit drivers from mounting anything on the windshield, or restrict mounting to specific areas of the windshield. It is the owner’s responsibility to mount the device in compliance with local laws.
Error may occur depending on the surrounding environment and the voltage of the car.
Blaupunkt is not liable/responsible for non-recorded event, missing files, etc.
Blaupunkt does not warrant the performance of the local telecommunication network used with our product. It is recommended to test for network compatibility prior to purchase.

STRUCTURE & FUNCTIONS

Front Camera

Rear Camera

Functions

LCD Touch Screen
Reset Button
Power Button (On/Off )
Front DVR Lens
DVR Bracket
T-Flash Card Slot
MicroSD card Slot
LED Light
Rear DVR Lens

SPECIFICATIONS

Real-time location and speed tracking
Historical tracking via wireless control app (Available on iOS and Google)
Real-time alarms notification: Acc On/Off, Geofence Entry/Exit, Power Disconnection, Overspeed
Real-time vehicle status report : Mileage, speed & overspeeding, parking
Operating Voltage : DC 9V-36V (Suitable for 12V & 24V vehicle)
Current : 10mA
Resolution : Front 2MP FHD 1920 x 1080 (30 fps); Rear 2MP HD 1280 x 720 (30fps)
Wide viewing angle : Front – 151°; Rear – 110°
3″ touch screen LCD display
Automatic park recording with smart motion/ time-lapse (24-hour park monitoring)
SOS for manual emergency alert broadcast, G-sensor, loop recording, low car battery voltage cut-off
Built-in microphone & speaker
Language : English, Simplified Chinese, Thai, Vietnamese
Support up to 32GB Micro SD, class 10 & above

FUNCTIONS LIST OF THE DEVICE

WIRING DIAGRAM

TROUBLESHOOTING

If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt authorized dealer if problem persist.

INSTALLATION INSTRUCTION

Front Camera

Select an ideal installation location that without obstructing the driver’s vision. Ensure that the front camera lens is located in the center of the windscreen.
Slide the mount to the mount rail on the device.
Remove 3M tape from the mount and bracket before joining them together.
Clean the preferred location on the windscreen before installing the device.
Adjust the viewing angle against the preview screen to ensure that the camera is facing the front.
Insert the microSD card into microSD card Slot & insert the T-Flash card to T-Flash Card Slot. Ensure the cards are in the correct direction before inserting them into the device.
It is recommended to place the GPS antenna on the top right of the windshield in order to keep a distance between the devices to prevent signal disruption.

OPERATION INSTRUCTION

Rear Camera

1. Select an ideal installation location.

a) Tail Light

Remove one side of the reverse light socket from its housing then remove the bulb from its socket.
Connect the reverse light power cable to the camera, screwn the housing & camera back into position with a screwdriver.

b) Hatch Handle

Use a screwdriver to remove the original hatch handle
Mount the camera where the original hatch handle used to be

c) Car Plate

Remove the rotating mount before installation. Drill an access hole for the camera cables
Mount the camera onto the acces hole & secure it in position with 3M tape/ screws