Comsol 10W Wireless Fast Charging Stand User Manual

Comsol 10W Wireless Fast Charging Stand

Compatibility

Compatible with Qi-enabled devices* including

  • iPhone X
  • Samsung SB/SB+
  • Sony Xperia XZ2
  • iPhone 8
  • Samsung S7/S7 Edge
  • Nokia 8 Sirocco
  • iPhone 8 Plus
  • Samsung Note 8
  • LG G7 ThinQ
  • Samsung S9/S9+
  • Samsung Note s
  • LG V30+

Features

  • Two charging coils enable large wireless coverage to allow charging in portrait or landscape mode
  • Supports 1 OW wireless fast charging for compatible devices such as Samsung Galaxy S9, S9+, SB, SB+, Note 8, S7 & S7 Edge
  • Supports 7.SW Apple wireless fast charging for iPhone X/8/8 Plus
  • Supports SW standard wireless charging for all Qi enabled devices
  • No need to remove your protective case. Works with most cases up to 3mm thick
  • LED indicator to show charging status
  • Smart IC enables energy saving mode when device is fully charged
  • Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
  • Includes 1.Sm micro USB cable to connect charging stand to USB wall charger (USB wall charger not included)
  • Check with device manufacturer for Qi wireless compatibility
  • When connected to a Quick Charge 2.0 or 3.0 wall charger (not included)

Wireless Charger Operation

  • Using the included micro USB cable, connect the wireless charging stand to a USB wall charger (USB wall charger not included)
  • It is recommended to use original or reputable 3rd party branded USB wall chargers. For faster charging limes it is recommended to use a USB wall charger with a minimum of 2A output
  • When connected to the USB charger, the red LED will be on for 3 seconds to indicate the charging stand is powered on and in stand-by mode
  • Place your Qi enabled wireless phone on the charging stand and your phone should start charging automatically
  • The LED will flash green to indicate charging
  • If your phone does not start charging, move your phone until the correct position is found and your phone starts charging
  • When your phone is fully charged, the Smart IC enables energy saving trickle charge modePlease NoteTo achieve 1 OW fast charging for Android devices or 7.5W fast charging for Apple devices, the charging stand needs to be connected to a Quick Charge 2.0 or 3.0 wall charger (not included)

Specifications

  • Wireless Standard: WPC/Qi (v1 .2.3)
  • Quantity of Wireless Charging Coils: Two Coils
  • Input: DC SV 2A or DC 9V 2A
  • Output: SW I 7 .SW I 10W (Max)
  • Working Frequency: 11 Oto 20SKH
  • Charging Distance: 3 to 8mm
  • Charging Efficiency: > 72%
  • Dimensions: 125 x 70 x 98mm
  • Weight: 178g

Important Safety Instructions

  • Only use original or reputable third party chargers and cables
  • Do not get wet to avoid causing short circuit damage and leakage
  • Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
  • Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
  • Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
  • Do not clean with harmful chemicals or detergents
  • Misuse, dropping or excessive force may cause damage to the charging stand

Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.

iPhone is a trademark of Apple inc., registered in the U.S. and other countries.The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium. Android is a trademark of Google Inc.

Qi CertifiedCertification program ensures this charger has passed rigorous tests to guarantee safety, compatibility and energy efficiency.

www.mycomsol.com.au

[xyz-ips snippet=”download-snippet”]


Posted

in

by