Aerpro® Universal Handsfree Car KitUser Manual
ABT350
Included Accessories: – 12/24V Car Charger head – Clip
Introduction:
Thank you for purchasing our Bluetooth car kit. This car kit is a wireless Bluetooth kit based on the Bluetooth technology that allows you to making and talking calls without touching your mobile phone.
Read this user guide carefully before using the car kit .Also read the user guide for your phone, which provides important safety and maintenance information. Keep the car kit out of reach of small children.
Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. A Bluetooth connection does not require the devices to be in line of sight, but both devices should be within 1 O meters (30feet) of each other. Connections can be subject to interference from obstructions.
ABT350 is compliant with Bluetooth Specification 3.0.There may be restrictions on using Bluetooth technology in some locations .Check with your local authorities or service provider.
Get started
Overview
1–MUTE2–LED display3– MIC4–Multi-function Button (MFB)5–Volume – button6–Volume+button7–Mini USB 5 PIN for the charging socket8–Speaker
Before you start using the car kit, you must charge the battery and pair the car kit with a compatible mobile phone.
Charger
This car kit is intended to use with the car charger that is included in the package. Charging the batteryThis device has a Rechargeable Lithium Polymer Battery 3.7V, 820mAH battery.
- Connect the car kit to the car charger. The red indicator light is displayed during charging. If charging does not start, disconnect the charger, pug it again, and retry. Charging the battery fully may take up to 2-3 hours.
- When the battery is fully charged, the red indicator light turns off. Disconnect the car kit from the charger.
When fully charged the battery has power for up to 4 hours of talking time or up to 30 daysof standby time. However, the talking and standby time may vary when used with different mobile phones, products that use a Bluetooth connection, usage settings, usage styles, andenvironments.
How to switch Bluetooth car kit ON and OFFTo switch on, Press and hold the ‘!MFB” multi-function button until there is a tone promptand the blue LED flashes 5 times. The car kit is now on.
To switch off, press and hold the “MFB” for 4 seconds until the red LED flashes 5 times.Pair the car kit with a compatible phone
- Make sure your car kit is switched off
- Press and hold the “MFB” until the blue and red light flashes alternately and there is a tone prompt. The car kit is now in paring state.
- Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions.
- Select the car kit (ABT350) from the list of found devices.
- Enter the pass code 0000 to pair and connect the car kit to your phone. you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the car kit with your phone once.
If the pairing is successful, the car kit’s blue light will flash 3 times briefly. The car kit’s name appears in the phone menu where you can view the currently paired Bluetooth devices.
Basic use
Call handling
- To make a call, use your phone in the normal way when the car kit is connected to your phone. And the blue LED will flash during the call.
- To answer a call, press the”MFB” and the blue LED will flash during the call.
- To reject a call, press the “MFB” for 2 seconds, there is a tone prompt when there is an incoming call.
- To end a call, press the”MFB” once ;
- In standby state, press the volume+ key for 2 seconds to redial last dialed telephone number. This function will work if your mobile phone supports redialing.
- In standby state, press the “MFB”to start voice dialing. This function will work only if your mobile phone supports voice dialing. Check the user manual of your mobile for details.
Adjust the volume
Press volume+ or volume – key to increase or to decrease the volume during a call. MuteDuring a call, press and hold’ mute button for about 2 second to mute the MIC. Repeat the same operation to take the MIC out of the mute state.
LED indicator status:
- When switched on: The blue LED flash five times.
- In standby state: The blue LED flashes once every 3 seconds,
- Connecting status: The blue LED flashes once every 3 seconds
- When making and answering a Call: The blue LED flashes
- When a call is in progress : The blue lights flashing fast
- Low battery warning: Red LED always on
- Switch off: red LED flashes five times.
- Charging state: The Red LED will stay on and it will turn off after charging is completed.
Main specifications:
- Bluetooth v3.0 +EDR, Class II
- Operating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM band
- Working Distance : Up to 10 meters
- Integrated with echo cancellation and Noise suppressor
- Built in speaker and microphone
- Battery Type: Rechargeable Lithium Polymer Battery 3.7V, 800mAH
- Charging Time: about 2-3 hours
- Talk Time: Approximately 4 hours
- Standby Time: Approximately 30 days
- Dimensions: 117 .Sx47x15.3mm
- Package includes : Car Charger, User Manual,
[xyz-ips snippet=”download-snippet”]