BOSE Pendant Suspension Cable Installation Guide
Important Safety Instructions
Please read and keep all safety and use instructions.
This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product in typical fixed-installation systems. Please read this document and all safety warnings before attempting installation.
WARNINGS/CAUTIONS:
All Bose products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the installer’s responsibility to evaluate the reliability of any mounting method used for their application. Only professional installers with the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. Ensure the bracket is installed by a qualified professional installer and in accordance with local building codes.
This product is not intended for installation or use in indoor water facility areas (including, without limitation, indoor pools, indoor water parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
Do not use for lifting, such as a crane or pulley, or for hanging installations that include movement or dynamic behavior. Intended for hanging static loudspeakers only.
Do not walk or stand on the cable installation.
Do not paint the cable fastener or any other part of the cable assembly.
If using a cable system not supplied by Bose, the working load limit must be equal to or greater than the supplied cable system.
Do not apply oil or any other lubricant to the cable fastener or any other part of the cable assembly.
Never join two cables together. Only use one cable assembly per loudspeaker hang point.
Only use the pendant suspension cable with Bose pendant loudspeakers.
Regulatory Information
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “7” is 2007 or 2017.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. For importer & service information: +5255 (5202) 3545
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan.Phone Number: +886-2-2514 7676Bose Corporation Headquarters: 1-877-230-5639
Bose is a trademark of Bose Corporation.
©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty. For warranty details, visit PRO.BOSE.COM.
Package Contents
Product Dimensions
- Always use the cable within its stated Safe Working Load. The included suspension cable has a Safe Working Load of 100 lbs.
Installing the Suspension Cable
- Insert the suspension cable through the cable fastener and wrap the cable around a support structure; secure the cable using the cable fastener.Note: Arrows on the cable fastener indicate the cable direction.
- A. To loosen the cable, insert the fastener tool into the release hole and adjust the cable.
- Secure the cable clip to the loudspeaker suspension cable attachment point.Note: For instructions on loudspeaker installation, see the Mounting the Loudspeaker section in the appropriate loudspeaker installation guide.
- Pull the loose end of the suspension cable to adjust the loudspeaker to the desired height. Once you’ve reached the desired loudspeaker height, cut away any excess cable.Note: Trim any frayed filaments with wire cutters after cutting to length.
Using the Suspension Cable as a Safety Cable
Some regional construction codes require the use of a secondary method of securing loudspeakers to support structures to provide additional safety. Choose a mounting position, method, and hardware consistent with local building codes and regulations.
Where applicable, the pendant suspension cable can be used as a safety cable by following the instructions in Installing the Suspension Cable while using the safety attachment point (1).
When using the safety attachment point, be sure that the safety cable is secured to a support structure independent of the primary suspension cable (2).
©2020 Bose Corporation, All rights reserved.Framingham, MA 01701-9168 USAPRO.BOSE.COMAM861341 Rev. 00May 2020
References
[xyz-ips snippet=”download-snippet”]