electriQ 30” Curved Led Monitor User Manual

eiQ-30CVWF200VAFSGH

Thank you for choosing electriQPlease read the user manual before using this monitor and keep it safe for future reference Visit www.electriQ.co.uk to view our entire range of Intelligent Electricals.

 

SAFETY INFORMATION

  • Read these instructions – All the safety and operating instructions should be read before this product is operated.
  • Keep these instructions – The safety and operating instructions should be retained for future reference.
  • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
  • Follow all instructions – All operating and usage instructions should be followed.
  • Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
  • Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
  • Do not block any ventilation openings.
  • Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
  • Do not tamper with the supplied plug. This plug is a 8S1363 standard plug.
  • Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.
  • Only use attachments/accessories specified by the manufacturer.
  • Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.
  • Unplug the apparatus during lightning storms or when unused for long periods of time.
  • Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
  • Please keep the unit in a well-ventilated environment.
  • The monitor should only be connected to a mains power supply as rated on the back of the equipment.
  • To prevent overload, do not share the same power supply socket with too many other electronic components.
  • Do not place any connecting wires where they may be stepped on or tripped over.
  • Do not place heavy items on the cable as this may cause damage.
  • When removing from a socket hold by the plug and not the wires.
  • Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the unit does not work normally.
  • Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus.
  • Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
  • Due to our continuous product development, the operation and or features of the product received may vary slightly from the information provided within the manual.
  • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
  • WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
  • WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire.
  • Although every effort is made to maintain the accuracy of the manual, due to continuous product development, some variation from the manual is possible.
  • The availability of features and settings may vary depending on the input source and method of connection.

 

WHAT’S INCLUDED

 

CONNECTIONS AVAILABLE ON THE MONITOR

  1. POWER
  2. USB (Firmware updates)
  3. HDMI 2 (HDMI 1.4, 75Hz, Free Sync)
  4. HDMI 1 (HDMI 2.0, 144Hz, Free Sync)
  5. DP (Display Port 1.2, 144Hz, Free Sync)
  6. AUDIO OUT

WALL MOUNTING

  • The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied).
  • The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied)
  • Do not use screws longer than specified or damage will occur to the internal components.

NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation.

 

GETTING STARTED

MONITOR CONTROLS

 

SHORTCUT BUTTONSThe monitor includes one touch options to access common settings.

 

INITIAL SETUPConnect the monitor to a power socket.

  1. Press the POWER button on the monitor or to turn it on (The indicator will be blue).
  2. Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
  3. To change between inputs, press the E button to enter the source menu. Use the ◄and ► buttons to choose the input source between DP, HDMI1 and HDMI2.

 

MENU OPTIONSThe menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is separated into the following sub menus: Input source, Brightness/Contrast, Colour Settings, Picture Quality Settings, Display, Audio, OSD (On screen display), and other. Details of each menu can be found in the following section.

 

OSD MENUINPUT SOURCE

Signal: Switch the signal input or select the source. DP, HDMI1, HDMI2

 

BRIGHTNESS/CONTRAST

 

COLOR SETTINGS

 

PICTURE QUALITY

 

DISPLAY

Aspect Ratio: Change the image aspect ratio to Wide Screen. 4:3 Auto. 1:1

 

AUDIO

 

MULTI-WINDOW

 

OSD

 

OTHER

 

SPECIFICATION

 

TROUBLESHOOTING

 

ENVIRONMENTAL PROTECTION

Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centres.

electriQ UK SUPPORT

www.electriQ.co.uk/supportIf the unit fails to operate call: 0871 620 1057 or complete the online formOffice hours: 9AM – 5PM Monday to Friday

www.electriQ.co.ukUnit J6, Lowfields Business ParkLowfields Way, EllandWest Yorkshire, HX5 9DA

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,