DTRL600S
Inclusions
Installation
- Use DTRL rubber support base as a template for marking holes required for attachment
- Drill holes into the bumper
- Line up DTRL to pre-drilled holes and secure with screws or bolts provided
Wiring Instructions
- To mount DTRL’s, use supplied rubber support base & mounting hardware.
- Connect the supplied wiring harness.
- 3 input wires +12V/24 DC ignition or accessory wire
- Wire with (_ _ _ _ symbol) to car ground (chassis) of vehicle
DTRL Wiring Instructions
For DTRL usage a relay is required
Wiring Instructions cont…
- To mount DTRL’s, use supplied rubber support base & mounting hardware.
- Connect the supplied wiring harness.
- 3 input wires +12V/24 DC ignition or accessory wire
- Wire with (_ _ _ _ symbol) connect to 87a of relay
- Connect headlight to 86 of relay
- Once connected, turn on to ignition, DTRL’s will turn on. Turn on parker lights and DTRL’s turn off
Notes: Some vehicles including CANBUS may require an additional relay to be installed between the DTRL and parking light connection. This is to fix flickering problems with the LED′s.
[xyz-ips snippet=”download-snippet”]