Soundcore Bluetooth Earphones Liberty Air User Manual

Soundcore Bluetooth Earphones Liberty Air User Manual

Wearing

1. Insert the earbuds into the inner canal if your ears.
2. Turn and find the most comfortable position.

Charging

• Remove the film on the earbuds when taking them out of the charging case for the first time.
• Open or close the charging case to activate the LED battery indicator.

Charging case indicator (When opened or closed)
Flashing white (for 5 seconds)	Display power level
	Slow Flashing white (for 5 seconds)	<5% power level
	Steady white	5%.-30% power level
	Steady white	30%-70% power level
	Steady white	>70% power level
Charging case indicator (Connected to power source)
	Steady white (for 1 second)	Charging
	Flashing white	0%-30% power level
	Second LED indicator flashing white	30%-70% power level
	Third LED indicator  flashing white	>70% power level
	Steady white	Fully charged
Earbud status indicator
	Flashing red (once every minute)	Low battery
	Steady white	Charging
Off	Fully charged

To preserve battery lifespan, fully charge at least once every 45b days.

Turn on / Off

1. The earbuds switch on automatically when taken out of the charging case. To manually switch on, tap the multifunction touchpad on both your earbuds once.
   

   ON

   Flashing white for 1 second (Earbud status indicator)

2. The earbuds switch off automatically when placed back in the charging case

Pairing

True Wireless stereo connection

	Slow flashing white (Breathing like)	True Wireless Stereo pairing mode
	Steady white (For 1 second)	True Wireless Stereo connection is successful (the right earbud is connected to the left earbud).

Bluetooth connection (Device)

Enter pairing mode when earbuds are switched on.

	Rapidly flashing white	Pairing mode
	Slow flashing white	Connection to a device

Controls

	Tap the multi-function (iq touchpad on the right earbud twice	Play / pause
	Tap and hold the multi-function touchpad on the right earbud for 2 seconds	Next track
	Tap and hold the multi-o • function touchpad on the left earbud for 2 seconds	Previous track
	Control volume via the connected device	Volume up / down
	Tap the multi-function touchpad on the right earbud twice	Answer / End call
	Tap and hold touchpad on right earbud for 2 seconds	Reject call
	Tap the multi-function touchpad on right earbud twice	Put current call on hold and answer incoming call
	Tap and hold touchpad on right erbud for 2 seconds	Switch between held call and active call
	Tap and hold touchpad on right erbud for 2 seconds	Switch between held call and active call
	Slow flashing white (Right earbud only)	On a call
	Slow flashing white (Right earbud only)	Incoming call
Tap the multifunction touchpad on the left earbud twice	Activate Siri / Other voice control software
–	–	–	–	–

Reset

How to reset the earbuds if you can only hear sound on one side:

1. Delete “Soundcore Liberty Air” from your device’s Bluetooth list, and turn off the Bluetooth on your device.
2. Place one earbud in the charging case and make sure it’s charging. The LED indicator will be solid white.
3. Tap and hold the multifunction touchpad of the earbud (currently in the charging case) for 7 seconds until the LED indicator flashes red 3 times. This clears the pairing information.
4.  Put the other earbud in the charging case and repeat step 3.
5. After the pairing information is cleared, take both earbuds out of the charging case and place them next to each other. If TWS pairing is successful the LED indicator on the left earbud will start flashing slowly and the LED indicator on the right earbud will flash rapidly.
6. Turn on Bluetooth on your device and search for “Soundcore Liberty Air” to connect.

Specifications

Customer Service

   [email protected]

+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00+81 03 4455 7823  9:00 – 17:00+86 400 0550 036  9:00 – 17:30+82-2-6464-7088 9:00-17:30