Nedis Bluetooth and noise-cancelling headphones User Manual

Nedis Bluetooth and noise-cancelling headphones User Manual

Description (fig. A)

 

 

1. MFB button
  • Press and hold the button for 3 seconds to switch on the device.
  • Press and hold the button for 5 seconds to switch off the device.Press the button to play the track. Press the button again to pause the track.
  • Press the button to answer a call.
  • Press and hold the button for 1 second to reject a call
  • Press the button 2 times to redial the last number.
2. Volume + button Next button
  • Press the button to increase volume.
  • Press and hold the button to go to the next track.
3. Volume – button Previous button
  • Press the button to decrease volume.
  • Press and hold the button to go to the previous track.
4. ANC switch
  • Slide the switch to enter noise-cancellation mode.
5. LED indicator (blue / red)
  • Pairing mode: The red and blue LED indicators flash alternately.
  • The device is paired: The blue LED indicator flashes once every 3 seconds.
6. LED indicator (red)
  • Charging mode: The red LED indicator is on.
  • Charging complete: The red LED indicator goes off.
7. Audio input (3.5 mm jack)
  •  Connect the audio cable (included) to the audio input and your device.
8. USB port

(Micro USB)
  •  To charge the device, connect the USB cable to the USB ports of the device and the computer or a USB adapter.

Pairing the device

  • Press and hold the MFB button for more than 3 seconds to switch on the device and enter pairing mode. The red and blue LED indicators flash alternately.Note: If the pairing is not completed within 5 minutes, the device will be automatically switched off.
  • Activate Bluetooth on your Bluetooth device.
  • Search for new devices on your Bluetooth device.
  • Select the device “HPBT5260BK / HPBT5260WT “.
  • The device will confirm when the pairing is completed.Note: If necessary, enter the default password “0000”.

Technical data

Battery type Lithium-ion battery (300 mAh)
Input voltage (USB charging) 5V
Rated power 10 mW
Maximum power 20 mW
Frequency response 20 Hz – 20 kHz
Driver unit Ø 40 mm
Signal-to-noise ratio (SNR) 105 dB / 1 mW
Playback time (ANC) ≤ 8 h
Charging duration ± 2 h

Safety

  • To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
  • Disconnect the product from the mains and other equipment if a problem should occur.
  • Read the manual carefully before use. Keep the manual for future reference.
  • Only use the device for its intended purposes.  Do not use the device for other purposes than described in the manual.
  • Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.

Cleaning and maintenance

Warning!
  •  Do not use cleaning solvents or abrasives.
  • Do not clean the inside of the device.
  • Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
  • Clean the outside of the device using a soft, damp cloth.

 

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,