PYLE Wireless BT Streaming Home Theater Receiver User Manual

PYLE Wireless BT Streaming Home Theater Receiver User Manual

Safety Precautions

A. Avoid opening the cover or back panel. Do not open the cover, fix or touch the inner parts. No user-serviceable parts inside, refer servicing to qualified service personnel.
B. Protect voltage line. Avoid high pressure and to be stomped on, do not pull, push excessively.
C. Please put on this unit in a windy place, avoid direct sunshine, and nearing the heater. Place the unit in a location with adequate air circulation.
D. Do not interfere with its proper ventilation; this will cause the internal temperature to rise and may result in a failure.
E. Avoid metals dropping in, like needle, hairpin, coin, otherwise, the unit will get short and out of work.
F. Be sure to set the line voltage AC230V/50Hz if you are not sure of the type of power supply, consult your appliance dealer or local power company.

For MAINS powered apparatus and for apparatus producing internal voltages greater than 35V (peak) a.c. or d.c., having no protection against splashing water according to annex A, the instructions for use shall state that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus

Front Panel

1. Power Switch

2. USB Input jack

3. DIGITAL INPUT KEY Press the DIGITAL INPUT key to select COAXIAL/OPTICAL/ HDMI 1/HDMI 2 digital input.

4. ANALOG INPUT KEY Press the ANALOG INPUT key to select USB/BT/AUX/DVD/CD/ FM and AM analog input.

5/6/7. /CH- / /AUTO/ /CH+ Use these three keys to operate USB/BT and Tuner functions.a. In the USB or Wireless BT channel, press these three keys to finish previous/ play/pause and next functions.b. In the FM/AM channel, press the AUTO key for broadcast stations auto-memory.

8. HD (ARC)

9. CH. MODEPress CH.MODE key to select differently channel modes. 2.1 or 5.1 channel

10. MENUPress MENU key and rotate VOLUME/ MULTI knob to adjust main channel BALANCE/main channel TREBLE/ main channel BASS/surround channel VOLUME/center channel VOLUME and subwoofer channel VOLUME.

11. MIC MENUWhen inserting the microphone, press the OK MENU key and rotate the VOLUME/MULTI knob to adjust MIC VOLUME/MIC TREBLE/MIC BASS/ECHO and DELAY.

12. MIC1/MIC2Microphone input jacks.

13. VOLUME/MULTI

14. VFD display

Rear Panel

TUNER ANTENNA
AUX AUDIO INPUT
DVD/CD AUDIO INPUT
ACTIVE SUBWOOFER OUTPUT
SURROUND RIGHT CHANNEL OUTPUT
SURROUND LEFT CHANNEL OUTPUT
CENTER CHANNEL OUTPUT
PASSIVE SUBWOOFER OUTPUT
FRONT RIGHT CHANNEL OUTPUT
FRONT LEFT CHANNEL OUTPUT
POWER SOCKET
COAXIAL INPUT
OPTICAL INPUT
HD 1 INPUT
HD 2 INPUT
HDMI OUTPUT (WITH ARC)
WIRELESS BT ANTENNA
VOLTAGE SELECTOR

Remote Control Function Introduction

Tuner
HD (HDMI)
AUX
DVD/CD
ARC
2.1/5.1 CH
COAX/OPTI
USB/BT
SL. Volume -/+
SR. Volume -/+
CEN. Volume -/+
SW. Volume -/+
Treble
Treble +
Volume +
Volume
Left
Right
Mute
Bass –
Bass +
Auto
AM
FM
Display +
Memory
Tuner
Tuner +
Display
ST/MO
Next Track
Play/Pause
Previous Track
Mic Volume -/+
Delay -/+
DSP -/+
Echo -/+
Mic Treble -/+
Mic Bass -/+

System Connection

Operating Instructions

Preparation before operation

This product must be placed on a flat, solid object to ensure that it has sufficient capacity to support the product without falling.
Please use this product according to the safety requirements in front of this manual and connect with other products (TV, speaker, DVD player or player) as required.
Open the audio source device connected to this product
Press the power switch button on the panel to turn ON the power.

Operation

Channel SelectionThe product has 11 pairs of channels input, digital channel input, and analog channel input: Select HDMI 1-2, OPTICAL, COAXIAL, and USB digital input by pressing the digital input button on the panel or remote control.

Select AUX, BT, DVD/CD, and FM by pressing the ‘analog input‘ button on the panel or remote control.

Channel ModePress “channel mode“, select2.1 or 5.1 channels on the panel or remote control

Volume AdjustmentTotal volume adjustment:Rotate the “VOLUME/MULTI” VOLUME/multi-function adjusting knob on the panel, or press the ‘total VOLUME +/-‘ button on the remote control to adjust the VOLUME.

Center, surround, heavy bass channel volume adjustment:Press “main menu” on the panel, adjust the screen to show “CV xx”, ”the SRV xx”, ”xx” and ”SWVxx SLV”, then rotate the MULTI VOLUME/multifunctional adjustment button on the panel, adjust the volume of the center channel, right surround channel, left surround channel and the heavy bass channel.

Press the ”Center volume +/-” surround volume +/-” and ”heavy bass +/-” button on the remote control, adjust the volume of Center, surround, and heavy bass. Channel.

MAIN CHANNEL TONE AND BALANCE

Press the ‘MENU‘ on the control panel of the receiver system. Adjust the display ‘TRExx’ ‘BASSxx’ and ‘L– //–R’. ‘VOLUME/MULTI’ is a volume/Multi-function knob. This knob can adjust the main channel bass/Treble volume level and Left/Right channel volume balance.

USB OPERATION

Press the ‘Input‘ button on the remote control or on the control panel of the receiver system. Select ‘USB’mode. Then insert a USB flash disk. This unit can automatically play the USB flash disk file. Then press, button to operate the corresponding function. Supports WMA/MP3/APE/PLAC files

Note:1. Because video files continuously update, this product can’t play all format files.2. If the USB flash disk doesn’t work on USB mode. The operation is invalid

MIC

Insert MIC. The display will show ‘OK ON’
Press the ‘OK MENU’ on the control panel of the receiver system. Rotate the ‘VOLUME /MULTI’ knob. Adjust MIC volume. Press the ‘MIC VOL+/-“MIC ECHO+/-“MIC DELAY +/-” on the remote control. Adjust the microphone Master/echo/delay volume level.

HIFI

In ANALOG INPUT mode, press the ‘HIFI’ button on the remote control. Output is 2.0ch stereo audio mode.

HDMI

Connect audio equipment (Blu-ray DVD player, Set Top Box ) with HDMI output by using an HDMI cable.
Press the ‘Digital input‘ on the remote control or on the control panel of the receiver system. Select the appropriate channel.
Press the ‘CH. MODE‘ on the remote control to change the channel of the broadcast program.
HDMI with ARC function. Set the TV audio in ‘External speaker‘ or ‘Audio system‘, press ‘ARC ON‘ on the remote control, The display will show ‘ARC on‘, This amplifier can play the TV audio. Press ‘ARC off‘, The amplifier goes back to the default channel.

Note: HDMI Version 1.4B. Support 3D 4K Make sure the TV has ARC function and set the TV in ARC ON state.

Wireless BT Function

The receiver connects to your Bluetooth-enabled device, allowing the system to receive your wireless Bluetooth signal and stream audio to any connected speaker system.
Press the ‘ANALOG INPUT’ on the remote control or on the control panel of the receiver system, then enter to ‘BT‘ mode–as indicated on the display screen.
Ensure Bluetooth is activated on your device and search for Bluetooth Network Named: PYLEUSA
No password is required for connecting.

ARC (Audio Return Channel) Function

The ARC (Audio Return Channel) function makes it easy for the PT696BT to play audio from any TV with a single HDMI cable. It can be adjusted either on the front control panel or via the included remote control.

Enable your TV to send audio signal upstream to a connected speaker system or AV receiver while eliminating additional cable connections and clutter from an optical audio cable (S/PDIF). ARC audio transmission links your speaker output to your television controls, meaning you do not need an external/additional remote or interface to configure audio levels. Enjoy an optimal multimedia home theater experience by connecting your television and Hi-Fi equipment into one, seamless entertainment system.

FM RADIO

Press the AUTO ” TUNE+/-” CH+/-‘ button on the remote control. Operate automatic search and save station, manually save and select the stored station function.

DSP Sound Field Control

Press ‘DSP‘ or ‘CH MODE‘ on the remote control. 7 different sound field effects can be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS)NOTE: Pressing those buttons on the digital input channel is invalid

LOUD

Press ‘LOUD ON‘ on the remote control. The low frequency of this unit can be increased appropriately at low volume. Then press ‘LOUND OFF‘ to cancel this function.

DISPLAY

Press ‘DISPLAY button on the remote control to adjust different display modes.

RESET

Press the ‘RESET‘ button on the remote control to restore to the factory setting state.

MUTE

Press the ‘MUTE‘ button on the remote control to turn the ON or OFF MUTE function.

STANDBY

Press the’ STANDBY‘ button on the remote control to turn ON the standby state. Press again to cancel standby mode.

Troubleshooting

If you are still experiencing issues, please contact your authorized local dealer or contact us on www.PyleUSA.com.

PT696BT

Wireless BT Streaming Home Theater Receiver5.2-Ch Surround Sound Stereo Amplifier System with 4K Ultra HD Support,MP3/USB/AM/FM Radio (1000 Watt MAX)

Features:

5.2 Channel Receiver System
AV (Audio/Video) Stereo Amplifier
Hi-Fi Home Theater Surround Sound
Built-in Bluetooth Wireless Audio Streaming
Next-Gen Audio DSP Sound Processing Technology
4K Ultra HD TV Pass-Through Support
3D Video & Blu-Ray Video Pass-Through Support
Digital Dynamic, VFD Display with AM/FM Radio
Connect & Stream Audio from External Devices
MP3 Digital Audio Support · USB Flash Drive Reader
Connection Interface: (2) IN, (1) OUT x HD, Speaker Binding Posts, Optical/COAX Digital Audio
HDMI Output + Dedicated RCA Subwoofer Output
(2) 1/4” -inch Microphone Inputs
Independent Input Source Selection
Digital Graphic Audio Output Level Display
Mic Echo, Bass, Treble, Volume Control Adjustment
Over Current, Short Circuit, and Over Voltage Protection

What’s in the Box:

AV Receiver
Remote Control
Power Cable

Wireless BT Connectivity:

Simple & Hassle-Free Pairing
Instantly Receives Wireless Music Streaming
Works with all of Today’s Latest Devices Smartphones, Tablets, Laptops, Computers, etc.)
Wireless BT Version: 5.0
Wireless BT Network Name: `PYLE PRO‘
Wireless Range: 30’+ ft.

Technical Specs:

Power Output: 1000 Watt MAX
Amplifier Receiver Type: 5.2-Channel
Speaker Impedance: 4-16 Ohm
S/N Ratio: >80dB · T.H.D.: <0.05%
Frequency Response: 20Hz-20kHz
Radio Station Memory: 30 Presets
Digital Audio File Support: MP3 / WMA / APE / FLAC
Maximum USB Flash Support: Up to 1 TB
Battery Operated Remote Control, Requires (2) x `AAA’ Batteries, Not Included
Power Cable Length: 3.9′ ft.
Power Supply: 115V/230V, switchable
Total Unit Dimensions (L x W x H): 16.9” x 13.8” x 5.5 ” -inches

This product can expose you to a chemical or group of chemicals, which may include “Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.