JBL Portable Party Speaker Built Light User Guide

ON-THE-GO

Quick Start Guide

Before using this product, read the safety sheet carefully.

* Power cord quantity, plug type, and microphone quantity vary by region.

Fully charge the speaker before outdoor use.

* Rotate to adjust the gain (for wired microphone only).** Rotate to adjust the microphone volume, echo, treble, and bass respectively.

* Rotate to adjust the guitar gain.** Rotate to adjust the guitar volume.

L channel / R channel

Always keep the charging port dry before connecting AC power.

Product name: PARTYBOX ON-THE-GO
AC power input: 100 – 240 V ~ 50/60 Hz
Built-in Battery: 18 Wh
Power consumption: 60 W
Total output power: 100 W RMS
Standby power consumption: < 2 W with BT Connection; < 0.5 W without BT Connection
USB output: 5 V 2.1 A
Speaker drivers: 1 x 5.25 in (133 mm) woofers + 2 x 1.75 in (44 mm) tweeters
Signal-to-noise (S/N) ratio: > 80 dBA
Frequency response: 50 Hz – 20 kHz
Battery charge time: < 3.5 hrs
Battery play time: > 6 hrs
Bluetooth version: 4.2
Bluetooth profile: A2DP v1.3, AVRCP v1.6
Bluetooth transmitter frequency range: 2.4 – 2.48 GHz
Bluetooth maximum transmitter power: 10 dBm (EIRP)
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Bluetooth range: Approx. 10 m (33 ft)
USB format: FAT 16, FAT 32
USB file format: .mp3, .wma, .wav
Digital input: Bluetooth / USB -9 dBFS
Input sensitivity:AUX in: 370 mV rmsMicrophone: 20 mV rmsGuitar: 100 mV rms
Product Dimension (W x H x D): 490 x 245 x 228 mm / 19.3 x 9.6 x 9.0 in
Net weight: 7.5 kg / 16.5 lbs

Wireless microphone spec

Frequency response: 65 Hz – 15 kHz
Signal-to-noise (S/N) ratio: > 60 dBA
UHF frequency band: 470 ~ 960 MHz (depends on SKU) (EU 657 ~ 662 MHz)
Transmitter transmitting power: < 10 mW
Microphone battery play time: < 10 hrs
Distance between transmitter and receiver: < 10 m

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.Note: The product is in compliance with the European Union energy legislation.1) Bluetooth connection modeThe product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection.2) Bluetooth disconnection modeThe product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is less than 0.5 Watts.

The maximum operating temperature is 45 °CNo naked flame sources, such as lighted candles, should be placed on the apparatus.

This equipment is a Class II or double insulated electrical applianceWireless microphone users shall rely on the white space databases in part 15 to determine that their intended operating frequencies are available for unlicensed wireless microphone operationat the location where they will be used. Wireless microphone users must register with and check a white space database to determine available channels prior to beginning operation at a givenlocation. A user must re-check the database for available channels if it moves to another location.