IKEA Eneby Bluetooth Speakers User Guide

Table of Contents

IKEA® Eneby Bluetooth Speakers User Guide

This document covers household speaker with Bluetooth ENEBY and serves as a guide on the product’s assembly, connection, operation, transportation, storage and disposal.

! Read this manual carefully before using the unit. Please keep the manual until the end of the product’s operation.

! Information on types of hazardous exposure

The product contains no hazardous or harmful substances that may release during the product’s life cycle according to operating rules.

WARNING:ALTERNATING CURRENT VOLTAGE OF 220V IS POTENTIALLY LETHAL!

GENERAL INFORMATION

The product was designed for general use in indoor spaces.

The product complies with the requirements of TR CU 004/2011 “On safety of low-voltage equipment”, TR CU 020/2011 “Electromagnetic compatibility of technical means” and TR EAEU 037/2016 ”On restriction of the use of hazardous substances in electro technical and radio electronic product”.

The product is certified.

TECHNICAL FEATURES

Source Voltage (alternating current), V: 100-240 V

Source Voltage battery (direct current), V DC: 14.4 V DC

Network power frequency Hz: 50/60Hz

Amplifier output power, W: 20.0W

The product’s protection rating: IP20

Operating temperature, °С: 0 – +45

Relative humidity, %, not exceeding: 95

Material: Plastic, Aluminium, Steel

Bluetooth version: V 4.2

Range in open air: 8-10 m

Operation frequency: 2405 – 2480 MHz

Output power: 4 dBm

Service Life: 10 Years

The product can still be used after the end of service life, if you follow the safety information and other instructions in the user manual. When you decide to stop using the product, please contact your local recycling facility regarding disposal of the product.

OPERATION

Safety measures

Installation, dismantling and maintenance of the product must be carried out at disconnected power supply.

In order to avoid accidents, it is strictly forbidden:

Operate the product that has mechanical damage.
Install, disassemble when the power is on.
To use chemically active or aggressive cleaning agents to clean the product.
To overload the product.

How to use

Inspect the product in order to ensure the integrity of the plug and cord. Insert the plug into the socket.

The product can be used with ENEBY battery pack

MAINTENANCE

Pull the plug before cleaning.

Wipe clean with a damp cloth. Wipe dry with a clean cloth.

TRANSPORTATION AND STORAGE

The product should be transported and stored in the package in compliance with safety precautions to avoid mechanical damage and exposure to atmospheric precipitation.

DISPOSAL

The product should be disposed of in compliance with local legal requirements.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

PROBABLE MALFUNCTIONS AND METHODS FOR REMEDY

Important! All works targeted at the remedy of possible malfunction of the product should be performed only with a disconnected power supply!

The product doesn’t work

check the supply-line voltage
check the integrity of the plug and socket

If these methods were of no use, contact qualified specialists.

PRODUCT DATA

For questions about the quality of IKEA goods, please contact the seller: LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1 – through the form on website http://www.IKEA.ru/, by phone 8 (800) 234-55-66 or to the IKEA Service department in any IKEA store.