dji Ronin SC BG18 Grip Instructions
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMOTM product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI OSMO has made and may make available.
DJI OSMO accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document.
Notwithstanding above, your statutory rights under applicable national legislation are not affected by this disclaimer. OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI OSMO”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI OSMO with all rights reserved. No part of this product or document shall be reproduced in any form without prior written consent of or authorization from DJI OSMO.
Introduction
The BG18 Grip makes RONINTM-SC compatible for handheld use. A 2450 mAh built-in battery powers the gimbal for up to 11 hours.
Usage
Visit https://www.dji.com/ronin-sc (User Manual) to learn more about how to use this product.
Specifications
Input Power
- Model: RB2-2450mAh-7.2V
- Type: 18650 Lithium
- Capacity: 2450 mAh
- Energy: 17.64 Wh
Please refer to http://www.dji.com/service for after-sales service for your product where applicable.DJI OSMO shall mean SZ DJI OSMO TECHNOLOGY CO., LTD. and/or its affiliated companies where applicable.
Compliance Information
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of theDirective 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-complianceEU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Environmentally friendly disposalOld electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
IC ComplianceThis device complies with ICES-003 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
For online support, please scan this code with Facebook Messenger
RONIN is a trademark of DJI OSMO.Copyright © 2019 DJI OSMO All Rights Reserved.
YC.BZ.SS001008.01
Printed in China.
[xyz-ips snippet=”download-snippet”]