kogan Sous Vide User Manual

Sous Vide

User Manual

AttentionPlease handle this product with care and inspection regularly to ensure it is in good working order. If the product, power supply cord or plug shows any signs of damage: stop use,unplug and contact Kogan.com support.

PLEASE READ ALL INSTRUCTIONS BEFORE USE AND SAVE A COPY FOR FUTURE REFERENCE!

1. Read all instructions carefully before using the machine.
2. Do not touch hot surfaces. Use handles or knobs. The lid and lid handles may get hot while cooking; use of an oven mitt when handling is advised.
3. Protect against electrical shock. Do not immerse cord, plug or sous vide cooking unit in water or any other liquids.
4. Children should not use this appliance. When is use around children, close supervision by an adult is necessary, and the appliance should be kept out of their reach.
5. Keep the appliance and power cord away from hot surfaces, heated ovens or stove burners. Operate the appliance only on a dry, stable surface such as a table or countertop.
6. Unplug from power outlet when not in use and before cleaning. Allow the machine to cool before putting in or taking out parts, or emptying the water bath. Do not immerse the appliance in water or any other liquid.
7. Do not use this appliance outdoors.
8. Do not use an attachment or accessory not advised by Kogan. Use of such attachments or accessories may cause fire, electrical shock or injury.
9. Do not use this appliance for any purpose other than its intended use.
10. Do not use this appliance if it has been dropped or appears to be damaged. Do not use this appliance if it has a damaged cord or plug, or after it malfunctions in any manner. Contact the Kogan customer service team for any necessary repairs, examinations or adjustments.
11. Do not attempt to operate (heat) the unit without sufficient water in the bath to completely cover the bottom rack and to reach the minimum fill level mark on the sidewall.
12. Take care not to overfill the water bath; allow sufficient room to accommodate the volume of food pouches when added to the water bath. Top off the water in the bath to no more than the MAX level mark after adding pouches, if necessary to ensure the food inside the pouches is completely submerged.
13. Extreme caution must be used when moving an appliance containing hot water or other hot liquids, including the sous vide. Always allow bath to cool before emptying unit.
14. Take care when removing the the lid when unit is hot, as the hot water will collect on the inside during cooking. Use oven mitts to remove the lid, then tip the lid carefully to drain accumulated water into the water bath for safety.
15. To disconnect, press the START/STOP button to turn off, then remove the plug from the wall outlet.
16. This appliance is not intended for use by people with reduced physical, sensory or mental capabilities or who lack experience with cooking appliances.

KNOW YOUR PRODUCT

A ­ Plastic Lid (may contain steam during the cooking process.)B ­ Viewable Glass Window (allows you to see the contents of the bath.)C ­ Control Panel and PID ControllerD ­ LCD Display ScreenE ­ Lid HandlesF ­ Side Handles (These are positioned assymetrically to aid in emptying bath)G ­ Durable Stainless Steel BodyH ­ MIN Water LevelI ­ MAX Water LevelJ ­ Pouch Rack (Arranges food pouches vertically or stacked in the water bath for even cooking.)

• TIME: Time setting button, ranges from 0 ~ 24 hours. When the machine stands by, press it once to set time in hours, then press again to set time in minutes.
• TEMP: Temperature setting button, ranges from 0 ~ 99° C. When the machine stands by, press it once to set in Celsius, then press again to set in Fahrenheit.
• + / -: Increase and decrease time or temperature settings.
• START/STOP: Start and Stop button. Press once to start the cooking process, then press again to stop.

Operating the Sous Vide

1. Ensure that the water bath contains water before use. The water should not be higher than the MAX level, nor lower than the MIN level. If there is no water in the bath, or the water is lower than the MIN level, the unit will not work and the LCD display will show the error code E04.
2. Plug the power lead into the back of the unit securely, then plug it into a wall socket.
3. Place the bags holding the vacuum packaged food into the pouch rack and then put the rack into the water bath.
4. Set the time and temperature using the control buttons.
5. Press the “Start” button and the unit will start to work. The marks of heating and water cycling will display on the LCD screen.
6. If the set time runs out, the device will not shut off. It will continue to work for one hour, with a “beep” warning tone every minute unless the user presses the “stop” button to shut the unit off.
7. When the set temperature is reached, the unit will stop heating and the “heating” icon will disappear. If the set time has not been reached and the temperature of the water is still lower than what has been set, the unit will start heating again with the heating icon showing.
8. If the temperature passes 85°C, the pump will stop working and the water cycling will stop automatically.

NOTES

• If the pump makes a noise when the machine is starting up, that just means the water in the bath is starting to cycle. After 5-10 seconds the noise will disappear.
• When putting water into the bath, ensure the water level is between the MIN and MAX levels.
• This cooker is not suitable for cooking food directly. Food MUST be packaged into bags before putting it into the bath.
• If the bag breaks or leaks during cooking, please take it out, clean the water bath fully and then start again when the food has been repacked.
• If the cooker makes abnormal noises during cooking, it may be caused by impurities being sucked into the pump. Please stop the unit, clean it and then restart.
• After use, please empty the water out of the bath.

Care and Cleaning

• Do not leave water sitting in the bath after use. Allow the water to cool, then remove the racks and using the offset handles for stability, pour the bath contents out into a sink.
•  Dry the interior with a soft, clean cloth.
• If impurities are sucked into the pump, please pour the water out of the bath, then take the baffle off using a screwdriver. Pour in new clean water (adding a small amount of detergent if necessary) and use the machine as normal without any food packages inside. The water cycle should wash away the impurities gradually. When the cooker has cleaned, please stop the unit and pour the water out.
• Never immerse the unit into water or any other liquid for cleaning.
• Never use abrasive or harsh chemicals to clean the sous vide.
• Never put the sous vide into a dishwasher.

If the problem persists, please contact the Kogan customer support team for information.