pTron Atom Rover Wireless Mono Headset Instruction Manual

pTron Atom Rover Wireless Mono Headset Instruction Manual

Headphone Overview

Headphone Wearing

Operation:

A. First pairing :

1. Move the power switch to position, and the unit enters pairing status when the red LED and blue LED flash alternately. It means pTron Atom Rover is ready to pair.Wearing the headphone:
2. Turn on Bluetooth on the mobile phone, and set it to scan for devicesiPhone: Settings > General > Bluetooth > OnAndroid TM phone: Settings > Wireless & Networks > Bluetooth: On > Scan devicesNote: The menu depends on the mobile phone’s OS.
3. When the Bluetooth headphone pTron Atom Rover is found the system prompts “Pairing” until “connected”.Note: If your headset is un-paired or disconnected from your device, please restart the headset and follow the pairing process again.

B. Multi-point connection:

1. When the headphone and the mobile phone are paired, you may want to pair the headphone with another or a new mobile phone. In this case, turn off the Bluetooth on the mobile phone, turn off the Bluetooth headphone and then pair with another mobile phone. When paired, turn on Bluetooth on both mobile phones and it will connect to both phones automatically.

C. Making/answering calls:

1. Answer/reject manually:When there is an incoming call, the system reports the caller number (requires phone support), and you can tap the button to answer the call or press and hold it to reject the call.
2. Answer/reject via voice:When there is an incoming call, you can say “YES” to answer the call or say “NO” to reject the call. This feature depends on the mobile phone’s OS.Note: Voice control may be unavailable in noisy environment.
3. Callback:Press the button twice consecutively to call back the last call.
4. Voice assistant/Voice dial:Press the button once to activate voice assistant. You can use voice assistant to dial number (requires phone support, i.e. the phone supports voice search).

D. Play/Pause/Volume control/Previous/Next:

1. Play/Pause: In music playing state, press to pause, and tap it again to resume playing.
2. Volume control: In music playing state, move & long press the button to adjust the volume.
3. Previous/next: In music playing state, move & short press and the button to select previous/next track.

Charging Feature

When the unit is being used, the system will beep four times in the interval of 5 minutes. When the unit prompts “Turn off”, it requires charging. The red LED is on when the unit is being charged, and the blue LED is on when fully charged.

Note: If the headphone won’t be used for long time, please charge it at least once every month to avoid damage.

Technical Specifications

Bluetooth 4.2 dual-module chip.Support voice dialing (requires phone support).Support music playing control/next song/previous song, and automatic switch when there is incoming call.Support dual pairing.Bluetooth profile supports advanced audio transfer protocol (A2DP), remote audio control (AVRCP), broadband handsfree v1.6 (HFP), headphone v1.2 (HSP), secure simple pairing (SSP2)Noise and wind noise reduction activates digital signal processing (DSP).Internal adaptive 5-segment equalizer.Stainless steel wind screen.Sound fiber web.Support various smart phones and tablet PCs.Transmission Range: Up to 10m from the paired deviceFrequency Response: 20Hz-20khzImpedance: 32ohmsSNR: 85dBTalk time/MusicPlaytime: Up to 8 hours*Battery Capacity: 90mahCharging Time: 90 min.Standby Time: 200 HoursWeight: 60gWall charger: 100-240VPower supply: 5V DC, 180mAOperating temperature: 32°F-104°F (0-40°C)Storage temperature: 32°F-104°F (0-40°C)Charging temperature: 32°F-104°F (0-40°C)

Disclaimer

The colors and specifications shown/mentioned in the user manual may differ from the actual product. Images shown are for representation purpose only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.