JOHN LEWIS Hiko Ceiling Pendant
Caring for your productWe recommend cleaning with a soft, dry cloth. Do not use abrasive cleaning materials as these will damage the finish. Indor use only. Replace bulbs from John Lewis or established brand of the same type and compatibility.
Aftercare and TroubleshootingIf you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & Partner Technical Support on 03301 230106.
Specification
Max. power: 5W M ax LEDRated input: 240V, 50HzIP rating: 20Weight: 4.6 kg
5 years guarantee
At John Lewis & Partners we test every light to high quality standards so we are able to offer you a 5 years guarantee.
RecyclingCaring for your product We recommend cleaning with a soft, dry cloth. Do not use abrasive cleaning materials as these will damage the finish. Indor use only. Replace bulbs from John Lewis or established brand of the same type andcompatibility. This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
Introduction
Thank you for purchasing this Hiko ceiling pendant. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Warnings
- This product is Class II.
- For your safety, this product must be installed in accordance with local Building Regulations.
- If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority.
- To prevent electrocution, switch off at the mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electricity supply without your knowledge.
- Always use the correct type and rated power bulb. Never exceed the rated power stated.
- When changing a bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.
- The bulb and surrounding parts can become extremely hot during use.
Parts list
Product assembly
Product assembly
References
[xyz-ips snippet=”download-snippet”]