ULINE Deluxe Work Stool User Guide

ULINE Deluxe Work Stool

PARTS

ASSEMBLY

1. Insert glides into legs of five-star base. Turn base upright. Insert gas lift into center of base. (See Figure 1)
2. Slide footring onto the gas lift and tighten knob to secure. (See Figure 2)
3. Remove knob and washers from armrest mounting bracket. Insert armrest into bracket. Place lock washer then plain washer on knob and insert knob into armrest mounting bracket. Repeat on opposite side. (See Figure 3)
4. Loosen knob on bottom of seat. Insert backrest post into corresponding slot in mechanism and tighten knob to secure. (See Figure 4)
5. Slowly lower stool assembly onto the gas lift. Press down on seat to secure. (See Figure 5)

STOOL ADJUSTMENTS

1. Seat Height Adjustment – To raise seat height, lift lever up with little to no weight on the seat. To lower seat height, lift lever up while sitting.
2. Back Height – To adjust back height, loosen knob and slide the back up or down. Set back at your preferred height and tighten knob to secure.
3. Seat/Back Tilt – To adjust seat/back angle, lift lever up. To lock tilt position, release the lever while sitting at preferred position.
4. Footring Height – To adjust footring height, loosen knob and slide the footring up or down. Set footring at your preferred height and tighten knob to secure.
5. Armrest Height Adjustment – To adjust arm height, press the button on the side of each armrest and move the arm up or down.