BOSE SUB1 POWERED BASS MODULE Instruction Manual

PROFESSIONAL

PRELIMINARY TECHNICAL DATA

SUB1POWERED BASS MODULE

Product Overview

A powered, portable bass module, the Sub1 subwoofer combines with virtually any portable PA and delivers low-end performance down to 40 Hz. It’s unique 7″ × 13″ high-excursion RaceTrack driver allows for an ultraslim enclosure, delivering a performance that rivals a traditional 12″ woofer without the cumbersome size, freeing up room in your vehicle and on the stage. Compared to the  ub2 subwoofer, Sub1 is the more compact subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity. You can stack multiple Sub1 subwoofers for even more low-end — or to unleash Cardioid Mode for directional bass. With a Sub1, you get a subwoofer that goes virtually anywhere and effortlessly fills out your sound.

Key Features

Add powerful bass to your portable PA system with a low-end range down to 40 HzGo from vehicle to venue easily with a slim design featuring a unique 7″ × 13″ high-excursion RaceTrack driver; a performance that rivals a conventional 12″ woofer with a smaller footprintStack multiple Sub1 subwoofers for even more bass or unleash Cardioid Mode for focused, a directional performance that steers the bass out front and decreases feedbackCombine seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch connectivity, which delivers both power and audio over a single cablePair with other powered loudspeakers via line input and output with selectable crossover modes, plus integrated threaded pole mount for use with Bose S1 Pro PA and more

Technical Specifications

Footnotes(1) Frequency response and range measured on-axis in an anechoic environment with recommended bandpass and EQ.(2) Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.(3) Net weight excludes slipcover and power cord.

Connections and Controls

1.  Standby Button: Press the button to power on the Sub. The LED will illuminate white while the Sub is on.
2. Line Inputs: Analog input for connecting an L1 Pro or another line-level audio source. Compatible with XLR, TRS balanced, and TS unbalanced cables.
3. Line Outputs: Use an XLR cable to connect the line-level output to a loudspeaker.
4.  sub match Thruput: Connect an additional Sub-bass module with a SubMatch cable. Up to two Sub1 or Sub2 powered bassmodules can be powered by a single L1 Pro32 via a SubMatch connection.
5. Power Input Cover: Prevents simultaneous use of the SubMatch Input and Power Input. Slide the cover to reveal the power input that is needed for setup.
6.  sub match Input: Connect the Sub to an L1 Pro32 with a SubMatch cable.
7. Power Input: IEC power cord connection.
8. westinghouse.com.au/manualsUSB-C connector for Bose service use and firmware updates.Note: This port is not compatible with Thunderbolt 3 cables.
9.  Line Output EQ: Select between FULL bandwidth or a multi-purpose HPF when using Line Outputs. Press the button to switch EQ settings. The corresponding LED will illuminate white while selected.
10.  Line Input EQ: Select between an optimized EQ for an L1 Pro or a multipurpose LPF when using Line Inputs. Press the button to switch EQ settings. The corresponding LED will illuminate white while selected.
11. Signal/Clip Indicator: The LED will illuminate green when a signal is present and will illuminate red when the signal is clipping or the Sub is entering limiting. Reduce the level or signal volume to prevent signal clipping or limiting.
12. Level Control: Adjust the level of audio output. The Level Control does not affect the Line Outputs. The 12 o’clock position is recommended when in use with an L1 Pro32.
13. Phase/Pattern Button: Adjust the polarity of the Sub. Press the button to switch polarity. The corresponding LED will illuminate white while selected. Also allows access to Cardioid mode when using two identical Submodules.

Product Dimensions

Performance

Frequency Response (On-Axis)

Architect and Engineer Specification

The sub shall be a single-driver, subwoofer with internally supplied power amplification and active equalization for multiple operating modes as follows:The sub shall consist of a modular 7″ x 13″ (177 mm x 330 mm) RaceTrack low-frequency driver mounted in a ported bass enclosure.The nominal horizontal beamwidth of the loudspeaker shall be omnidirectional, with a –10 dB rear rejection when in Cardioid mode. The nominal vertical coverage shall be 0°. The power amplification for transducers shall be supplied by an integral single-channel onboard amplifier providing 480 W for the low-frequency transducer.The onboard digital mixer shall consist of two input channels. Each input channel shall provide two combination XLR or 1/4″ TRS connectors (line-level) with selectable equalization presets for low-pass filter and L1 optimization. Each input channel shall also provide an XLR balanced line-level connector with selectable equalization presets for full bandwidth, high-pass filter, and S1 Pro optimization. The digital mixer shall provide master output level control and phase/pattern control for the positive polarity, negative polarity, and Cardioid mode. The sub shall provide multi-pin SubMatch input and output connectors to receive power from L1 Pro32 and send power to another Sub1/Sub2 with a Bose SubMatch cable.The enclosure of the sub shall be constructed of high-impact polypropylene and birch plywood. The sub shall provide a pole-mount M20 threaded insert for use with the Bose Sub1/Sub2 Adjustable Speaker Pole. The sub shall provide four interlocking feet on each side for stacking with one other Sub1.The sub’s dimensions shall be 21.0″ H × 10.2″ W × 20.8″ D (533 mm × 260 mm × 529 mm). Its net weight shall be 34.1 lbs (15.5 kg).The sub shall be the Bose Sub1 portable powered bass module.

Safety and Regulatory Compliance

The Sub1 powered bass module complies with the following standards:

•  UL/IEC/EN62368-1 Audio/Video, Information, and Communication Technology Equipment
• Ecodesign Requirements for Energy Related Products Directive 2009/125/EC
•  Radio Equipment Directive 2014/53/EU
• CAN ICES-3 (B)/NMB-3(B)
• FCC Part 15 Class B

Bose, L1, and ToneMatch are trademarks of Bose Corporation. All other trademarks are the property of their respective owners.

For additional specifications and application information, please visit PRO.BOSE.COM.Specifications are subject to change without notice. 6/2021

References

• 
  L1 Pro Portable Line Array Systems | Bose Professional
• 
  Bose Professional