Intezze CLIQ TWS EARPHONES User Manual
Product description
- Microphone
- Microphone
- LED indication
- Touch control area
- Ear tip
- LED indication
- Charging case
- USB-C charging interface
Pairing
After being taken out from the charging case, the earphones will be paired automatically together. Prior to the first use with every device, it is necessary to pair the earphones:
- Remove both earphones from the case and wait for about 3 seconds before pairing mode is activated (both earbuds will flash blue).
- Select “Intezze CLIQ” from the available BT devices on your phone and select connect (if necessary, confirm the intention to pair the earphones). After successful pairing you´ll hear a confirmation message “Connected”.
Powering ON / OFF
Power ONMethod 1: Take out the earphones from the charging case, the earphones will switch on automatically.Method 2: In the off state, press and hold the touch area on both earphones for 3 seconds. The earphones will turn on and you can hear the prompt “power on”.
Power OFFMethod 1: Put the earphones into the charging box. They will shut down automatically, but not if the charging case runs out of battery.Method 2: Turn off your phone’s Bluetooth and the earphone will automatically shut down in 3 minutes.Method 3: Turn off your phone’s Bluetooth and hold the touch area on both earbuds for 4 seconds until you hear “Power off”
Playback controls
Play / PauseTouch the left or right earphone twice gently
PreviousPress and hold the L touch area for 2 seconds
NextPress and hold the R touch area for 2 seconds
Volume +Touch the right earphone once gently
Volume –Touch the left earphone once gently
In call controls
Answer callTouch the left or right earphone once gently
Hang upTouch the left or right earphone twice gently
Cancel dialingDuring dialing, press L / R touch area for 2 seconds
Reject callPress the left or right earphone for 2 seconds
Voice assistant
Wake up / Cancel voice assistant: Touch the left or right earphone three timesgently
RESET function
If the earphones fail to connect / only one of the earphones is functional, youcan reset them using the reset function:
- Delete “Intezze CLIQ” from the list of paired devices on the phone.
- Take both earbuds out of the case and tap them 5x quickly (simultaneously). Both earbuds’ LED will turn purple and then turn off. You will hear the “Power off” prompt.
- Power on both earbuds by holding both touch areas for 3 seconds (or put both earbuds into the case, the earbuds will be on red light, then take them out of the case). Wait until both earbuds will flash blue lights.
- Now you can repeat the pairing process with your phone.
Charging
The earbuds and the charging case need to be fully charged prior to first use! Earphones: Put the earphones into the charging box, the charging case will automatically charge the earphone, and the earphone will display a red light when charging.
Charging case:Use the included USB-C cable to charge the case
LED indication on the earbuds
| STATUS | Indicator light |
| Not paired | Red and blue lights flash quickly |
| Waiting to be paired | Blue light flash quickly |
| Paired successfully | The indicator light is off |
| Powered ON | Red and blue light up quickly for 1 second |
| Powered OFF | The indicator light is off |
| Play | The indicator light is off |
| Pause | The indicator light is off |
| StandBy | The indicator light is off |
| Incoming call | Blue light flashes twice every 3 seconds |
| Call in progress | The indicator light is off |
| Charging | Red light is always on |
| Charging complete | The indicator light is off |
| Charging case | When charging, the indicator light will gradually become bright or dim. Power indicator: Red light: 5-35%; yellow light: 35 -70%; green light: 70%-100% |
| Charging earbuds | When you put the earbuds into the charging box, the LED will show the charging box battery status for about 8 seconds and then it will turn off. |
| Charging complete | Green light turns off after 8 seconds. |
| Charging error | Red light flashes quickly. |
Voice prompts
| STATUS | PROMPT |
| Power on | Power on |
| Power off | Power off |
| Low battery | battery lowv |
| Pairing | Pairing |
| Paired successfully | Connected |
| Disconnect | disconnected |
| Maximum volume | “DiDi” |
| Minimum volume | “DiDi” |
Special instructions
- Apple iPhones and some Android phones can support the adjustment of phone volume if you need to use headphones to adjust the volume; but for some Android phones, you can only adjust the volume of earphone itself. If you need to restore the default volume, put the earphones in the charging box and take them out after the red light turns on.
- When holding the earphone, do not touch the touch panel area of the earphone to avoid disoperation.
Precautions
- The case with earbuds needs to be fully charged prior to first-time use.
- If the earbuds are left unused for over two weeks, please recharge the case with earbuds periodically.
- Listen with the volume setting as low as possible. Listening at high volume for an extended period may result in permanent damage to your hearing.
- Keep your earphones and accessories out of reach of children. Children should use the earphones only under adult supervision.
- Do not expose the earphones to water for a prolonged period. Do not use it when swimming, diving, or in the shower.
- Using your earphones in a moist or dusty environment, or near a strong magnetic field, may result in an internal circuit failure.
- Do not store your earphones in an environment where the temperature is below -15°C or above +50°C.
- Do not charge the earphones and the charging case in an environment where the temperature is below 0°C.
- Do not expose your earphones or charging case to direct sunlight (such as on a window sill or on a car dashboard) for an extended period of time.
- To avoid damage to your earphones, do not disassemble or tamper with them, and do not insert any foreign matter into them.
- Keep the earphone grille clean on both earphones in order to avoid sound degradation.
Warranty conditions
The warranty does not cover the following situations:
- Damage caused by tampering with the device.
- Filters clogged by earwax (may not be properly visible) or otherwise dirty. Cleaning must be performed by an authorized service provider and ischarged.
- Earphones with the earphone duct filters removed.
- Physical damage to the headphones caused by a fall or impact.
- Damage caused by force majeure.
All information in this document is subject to change
[xyz-ips snippet=”download-snippet”]