ULINE Basket Truck Replacement Liner Installation Guide

ULINE Basket Truck Replacement Liner

TOOL NEEDED

ASSEMBLY

LINER REMOVAL

(IF LINER IS RIVETED TO FRAME)

1. Using a utility knife, start by slicing the liner casing (from top to bottom) around each corner and frame rod. Make sure the liner is completely detached from the frame rods.
2. Cut completely around the top of the black hem of the liner above the rivets (be sure to cut through all layers).
3. Cut the liner around each of the metal rivets.
4. Cut through any remaining material to remove the liner from the basket truck frame.

LINER INSTALLATION

1. Remove the replacement liner and rope from poly bag.
2. Unfold the liner and insert into frame. When inserting the liner, be sure:• The black hem is facing inward.• The Uline pocket is facing outward on the narrow end of the basket truck.NOTE: 6 and 24 BU basket truck pocket is positioned in the center. NOTE: 10 through 20 BU basket truck pocket is positioned on the right side of the center frame rod.
3. Fold the black hem over the frame so the grommets are aligned on the inside and outside.
4. On a narrow end of the truck, begin threading the rope from the center grommets. Start threading from the outside to the inside. Continue outward from the center.
5. As you approach the corners, thread the rope from the inside to the outside. The rope should go around the corners on the outside.
6. Continue around the perimeter. You should end with both ends of the rope on the outside.
7. Pull the rope around the basket truck as tight as possible. Tie the two ends using a double knot. Trim the rope as necessary.

1-800-295-5510www.uline.com