ULINE H-5487 Flat Screen Cart Installation Guide
TOOLS NEEDED
- Phillips Screwdriver
- Allen Wrench
- Base x 1
- Caster x 4
- Mounting Bolt A x 4 (M8 x 25mm)
- Bolt Cover x 1
- Mounting Plate x 1
- Cable Guard x 4
- Mounting Bolt B x 4 (M6 x 25mm)
- Mounting Bolt C x 4 (M5 x 25mm)
- Upright Assembly x 1
- Base Bolt x 4 (M8 x 20mm)
- Crossbar x 1
- Spacer x 4
- Cotter Pin x 1
- Bar Bolt x 8 (M6 x 10mm)
- Short Vertical Mounting Bar x 2
- Long Horizontal Mounting Bar x 2
- Washer x 4
- Lock Washer x 4
SAFETY
WARNING! Severe personal injury and property damage can result from improper installation.Read instructions carefully before beginning.
- Do not install or assemble if the product is damaged or hardware is missing.
- This product fits most 32-60″ flat panel displays; maximum weight for the display is 100 lbs. (45.5 kg).
- Do not use this product for anything other than what it was originally designed.
ASSEMBLY
- Lock casters. Place lock washer over caster stem and screw into base. (See Figure 1)
- Insert upright assembly into base with cable management holes facing back of unit. Fasten in place with four base bolts. (See Figure 2)
- Snap bolt cover into place. (See Figure 3)
- . Adjust uprights to desired height using plunger buttons. (See Figure 4) NOTE: Never adjust height with the cables connected or flat screen mounted.
- Unscrew pre-installed bolts from crossbar. Slide crossbar into position and screw bolts back into place. (See Figure 5)
- Check your flat screen to determine the mounting pattern and mounting bolt size needed. Several common mounting patterns are shown here. (See Figures 6-7) NOTE: Test bolt size in flat screen to determine correct size.Mounting Bolt A – Used on flat screens with larger 8mm bolt holes.Mounting Bolt B – Used on flat screens with medium 6mm bolt holes.Mounting Bolt C – Used on flat screens with smaller 5mm bolt holes. NOTE: If flat screen is already mounted on a pedestal, remove pedestal prior to mounting.
- Attach mount assembly to flat screen. NOTE: Spacers should be used between mounting bars and flat screen to avoid damage. (See Figure 8)FOR 200mm x 200mm MOUNTING PATTERNS:If using a 200mm x 200mm mounting pattern, attach mounting plate directly to flat screen using mounting bolts, washers and spacers. (See Figure 9)FOR ALL OTHER MOUNTING PATTERNS:For all larger mounting patterns, attach long horizontal mounting bars to mounting plate using four bar bolts. (See Figure 10) NOTE: To correctly position horizontal mounting bars, make sure oval mounting holes are on the bottom and the lips face the mounting plate. NOTE: To correctly position vertical mounting bars make sure oval mounting holes are centered at the width of your mounting pattern and the lips face the mounting plate. NOTE: Before continuing to step 8, make surecasters are in the locked position. (See Figure 13)
- Lift lock hooks on mounting plate. (See Figure 14)
- Lift flat screen and hook mounting plate onto crossbars. (See Figure 15)
- Secure flat screen by engaging lock hook and fastening with cotter pin. (See Figure 16)
- Snap cable guards into place. (See Figure 17)
NOTE: Never adjust height with the cables connected or flat screen mounted.
FOR 200mm x 200mm MOUNTING PATTERNS:If using a 200mm x 200mm mounting pattern, attach mounting plate directly to flat screen using mounting bolts, washers and spacers. (See Figure 9)
FOR ALL OTHER MOUNTING PATTERNS:For all larger mounting patterns, attach long horizontal mounting bars to mounting plate using four bar bolts. (See Figure 10)
1-800-295-5510uline.com
[xyz-ips snippet=”download-snippet”]