ULINE H-3012 Plastic and Fiber Drum Truck User Manual
1-800-295-5510uline.com
OPERATION
WARNING! Read all instructions before using this truck.
- Position truck with both nose pads in contact with bottom edge of drum. (See Figure 1)
- Wrap belt around drum and place in fork grooves, if existing. (See Figure 2) NOTE: Make sure belt is not twisted.
- Tighten belt so that truck frame touches upper part of drum. (See Figure 3)
- Pull truck back carefully just until drum rests on nose pads, then re-tighten belt. (See Figure 4)
- You are now ready to transport the drum. (See Figure 5) NOTE: With heavier drums, place foot on backrest for better leverage.
NOTE: Make sure belt is not twisted.
CAUTION! 1,000 lb/454kg MAXIMUM CAPACITY.
- DO NOT OVERLOAD.
- DO NOT USE WITHOUT BELT.
- USE ON LEVEL SURFACES ONLY.
- DO NOT USE ON STAIRS OR RAMPS.
CAUTION! Make sure drum rests securely on nose pads before moving. When unloading, be sure to hold truck securely when loosening belt.
0521 IH-3012
[xyz-ips snippet=”download-snippet”]