TRISTAR AT-5468 Air Cooler Instruction Manual

Table of Contents

TRISTAR AT-5468 Air Cooler Instruction Manual

Product Overview

SAFETY

By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
The appliance must be placed on a stable, level surface.
The user must not leave the device unattended while it is connected to the supply.
This appliance is only to be used for household purposes and only for the purpose it is made for.
This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
Empty the tank and refill every third day.Before refilling, clean it with fresh tap water or cleaning agents if required by the manufacturer. Remove any scale, deposits, or film that has formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
Clean the filter regularly.
Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
Unplug the appliance during filling and cleaning.
Never leave water in the reservoir when the appliance is not in use.
Empty and clean the air cooler before storage. Clean the air cooler before next use.
WARNING: Microorganisms can grow in the water reservoir and be blown in the air causing serious health risks when the water is not renewed and the tank is not cleaned regularly and properly.

Cleaning and maintenance

Always disconnect the power cord from the socket before any cleaning.
Clean the outside with a damp cloth. Never use harsh and abrasive cleaners, steel wool or a scouring pad as this will damage the device. Do not immerse in water or other liquid.
Remove filter from the device and clean it with warm soapy water, let the filter dry completely before being replaced. If the fan will not be used for a long period of time, drain the condensate water and store it in a dry place.
This electrical appliance was manufactured in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.

PARTS DESCRIPTION

Control panel
Air outlet
Water level indicator
Caster wheel
Remote control
Ice boxes

Control panel

Swing button
Cool button
Mode button
On/Speed Button
Timer button
Off button

Remote control

2xAAA size batteries are required.
Ensure batteries are inserted in the correct direction.
When replacing, ensure both batteries are changed simultaneously.
Press the corresponding buttons as explained in the use part to operate the cooler.

BEFORE THE FIRST USE

Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
Place the device on a flat stable surface and ensure a minimum of 10cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50Hz)
Fill the water tank. See picture below for instructions.
To increase the cooling effect, you can put the frozen ice boxes in the water tank.

USE

Use the swing button to turn on the oscillation mode. The airflow will now move from side to side. Press the button again to turn it off.
Press the cool button to turn on the cooling function. The unit will act as a evaporator now. If combined with the ice boxes, this unit can lower its surrounding temperature even more.
Use the mode button to select a type of airflow. You can choose between normal airflow, a natural mode and a sleep mode. The natural mode will try to simulate natural wind, while the sleep mode provides a more constant airflow. Experiment with these functions to see what you prefer.
Repeatedly press the on/speed button to select the desired airflow speed. There are three levels to choose from (high, medium and low speed).
When the unit is in on, press the timer button repeatedly to have the fan automatically stop after 0.5 to 7.5 hours.
If you want to use the ice boxes, remember to put it in the freezer beforehand. Use them when they are completely frozen.

ENVIRONMENT

This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.