nedis IREX100BK IR Extender User Manual
Introduction
Infrared extender for control of equipment. Ideal for control of equipment in a closed closet. Complete with 3 infrared sensors to control 3 devices such as DVD, VCR, STB, SAT, Home Cinema Receiver, etc. Extra IR receiver for more flexibility.
Description
Front
Back
Application 1:
- Connect the IR extension cable and IR receiving sensor to the infrared receiver as shown in the picture.
- Place the IR eyes precisely in front of the IR sensors of the equipment.
- Connect the power supply.
Application 2:
- Connect the IR extension cable and IR receiving sensor to the infrared receiver as shown in the picture.
- Place the IR eyes precisely in front of the IR sensors of the equipment.
- Connect the power supply
Operation
Specifications
- Operating Voltage: 12 V DC, 250 mA
- Power Consumption: 1W (max)
- Effective Operating Range: 6M (min)
- Infrared Tuning Frequency: 30~60KHz
- Extender Probe: 3 IR eyes on 2 meter cable
Safety precautions
Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of this product.
General:Designs and specifications are subject to change without notice.All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognized as such.Keep this manual for future reference.
Attention:This product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products.
[xyz-ips snippet=”download-snippet”]