anko 43023462 Kmart In Ear Noise Cancelling Sports Earphones Instruction Manual

Bluetooth ®Sport EarphonesOperating instructions

includes:

• Bluetooth Sport Earphones
• Charging Cable
• 3 Pairs of Ear Cap
• Manual

43-023-462

Pairing the headset with Bluetooth devices

• Once the Earphone is powered on, it is in pairing mode (Red & Blue LED flashes alternately) and will pair to the last paired device (if available).
• Pair the Earphone in Bluetooth menu in mobile phone and once it is paired, you can hear a “connected” tone and the LED will goes or. Bluetooth Name: Anko Sport ANC

Phone calls

• Press MFB button once to pick up/hang up phone calls.Playing musicWhen the Earphone connects with the mobile phone via Bluetooth you can enjoy music through the  Earphone wirelessly. Long press “-” button to switch to the previous track, long press “+”button to switch to the next track.

Battery ChargingThis Bluetooth headset is powered by a rechargeable lithium battery.Please use the accessory USB cable to recharge the battery.

• Insert USB charging cable into a suitable USB port.
• Connect charging cable with the Earphone USB port.
• Indicator LED turns RED to show the battery is charging.
• Indicator LED turns OFF when a battery is fully charged.
• It takes about 1.5 hours to fully charge the battery.

Specifications:

The active noise canceling function is effective to reduce low-frequency ranges such as airplanes, trains, or offices (near air-conditioning, etc.)The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under licence.

Function overview:

How to use these headphones:

Function OperationPause Short press button 1 timePlay Short press button 1 timeNext track Long press + button 2sPrevious track long-press – button 2sVolume Up Short press + buttonwhen the volume is adjusted to the maximum you will hear a voice indication toneVolume Down Short press – button

Power ON / OFFPower ONLong press 2 seconds, until you hear a”power on” prompt tone. LED indicator flashes Blue 3times.Power OFFLong press 3 seconds, until you hear a “power on” prompt tone. LED indicator will flash red for 1 second, and then goes on.Noise Reduction On Short press the noise reduction button 1 time.

12-month warranty

Thank you for your purchase from Kmart.

Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with the accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

Kmart will provide you with your choice of a refund, repair, or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at kmart.com.au for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to our Customer  Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

WARNING This product shall be supplied by a power source not exceeding PS1 only.>The battery in the product is non-replaceable.> Danger of explosion if the battery is incorrectly replaced.>Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage, or transportation.>Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.>Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.>Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. The ambient temperature for product normal operation is 0 ℃ to 45 ℃>A battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

References

• 
  kmart.com.au