Before You Begin
 |
Keep these instructions for future reference as they contain important information. |
 |
Four C batteries are required (not included).Alkaline batteries make this toy work longer before you need to change them. |
 |
Clean with a damp cloth. Do not immerse. |
 |
Adult assembly is required (because we needed to fit this toy in the box). |
 |
Plan on about 15 minutes for assembly. |
 |
You’ll need a Phillips screwdriver (not included) for assembly and battery replacement. Do not over-tighten assembled screws or the screw in the battery door. |
Assembled Parts
Assembly
Battery Installation
Loosen the screws in the battery door and remove the door. Insert four, new C (LR14) alkaline batteries.Make sure you insert the batteries correctly!Replace the battery door and tighten the screws.You may need to reset the electronics if this toy begins to operate erratically. Slide the power-volume switch off and back on.When sound or lights become faint or stop, it’s time for an adult to change the batteries.
Slide the power-volume switch to: ON with low volume
, ON with high volume, or OFF.When you turn the power ON, the toy will roll back and forth and prompt you to choose a game mode to start playing!
Game on! Let’s play!
Play Tips
This toy goes to sleep after about 60 seconds of inactivity. Press any button to wake up.When you make a basket, the ball return will bounce the ball back to you.For best performance, use this toy on hard, flat surfaces. We do not recommend use on carpets.This toy works best when the light in the room isn’t too bright. If this toy behaves erratically, try dimming the light by closing curtains or turning a light off.Once you become familiar with the 4 game modes, you may not want to listen to the instructions each time you start a new game. To skip the instructions, just make a basketand get right into the game.
Storage
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
- Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable.
- Insert batteries as indicated inside the battery compartment (+ and -).
- Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
- Never short-circuit the battery terminals.
- Use only batteries of the same or equivalent type, as recommended.
- Do not charge non-rechargeable batteries.
- Remove rechargeable batteries from the product before charging.
- If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.CAN ICES-3 (B)/NMB-3 (B) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
UNITED STATESFisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.Consumer Services: 1-800-432-5437.service.mattel.comCANADAMattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R3W2. Consumer Services/Service à la clientèle : 1-800-432-5437.www.service.mattel.com.GREAT BRITAINMattel U.K. Limited, The Porter Building, 1 Brunel Way, Slough SL1 1FQ, UK.www.service.mattel.com/uk.NEDERLANDMattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.AUSTRALIAMattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria3121 Australia. Consumer Advisory Service 1300 135 312.NEW ZEALAND16-18 William Pickering Drive, Albany 1331, Auckland.SOUTH AFRICAMattel South Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
©2021 Mattel.PRINTED IN CHINAGYM22-0970G1-1102653436-DOM
References
[xyz-ips snippet=”download-snippet”]