Bushnell 201540 Laser Rangefinders Tour X
201540 – Bushnell® Tour® X Jolt® – Laser RangefinderCongratulations on your purchase of the Bushnell® Tour® X Jolt® Laser Rangefinder, our top of the line laser rangefinder for golfers and used by more golf professionals than any other brand. The Tour® X Jolt® is a precision Laser Rangefinding optical instrument designed to provide many years of enjoyment. This booklet will help you achieve optimum performance by explaining its adjustments and features as well as how to care for this precise laser rangefinding optical instrument. To ensure optimal performance and longevity, please read these instructions before using your Tour® X Jolt®.
INTRODUCTION
Your Bushnell® Tour® X Jolt® is an advanced premium laser rangefinder comprised of Digital Technology and turbo processors allowing range readings from 5–1300 yards / 5–1189 meters, and combines the best of a premium compact monocular with the new Dual Display Technology™. Measuring 1.5 x 4 x 3 inches, the 8-ounce Tour® X Jolt® with 2nd Generation E.S.P. ™ (Extreme. Speed. Precision.) delivers extremely fast acquisition and incredible ½ Yard accuracy and 1/10 precision from 5–125 yards and +/- 1 yard Accuracy from 126–1300 yards. The Tour® X Jolt® features PinSeeker™ technology with JOLT, allowing the golfer to easily and quickly “zero” in on the flag without acquiring background targets, and Superb Optical Quality.
HOW OUR DIGITAL TECHNOLOGY WORKSThe Tour® X Jolt® emits invisible, eye safe, infrared energy pulses. The Tour® X Jolt® Advanced Digital microprocessor and ASIC chip (Application-Specific Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the rangefinder, to the target, and back.
RANGING ACCURACYThe ranging accuracy of the Tour® X Jolt® is plus or minus one yard / meter under most circumstances. The maximum range of the instrument depends on the reflectivity of the target. The maximum distance for most objects is 1000 yards / 914 meters while for highly reflective objects the maximum is 1300 yards / 1189 meters.
Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular target and the environmental conditions at the time the distance of an object is being measured. The color, surface finish, size and shape of the target all affect reflectivity and range. The brighter the color, the longer the range. Red is highly reflective, for example, and allows longer ranges than the color black, which is the least reflective color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a larger target. The angle to the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease the unit’s maximum range.
E.S.P.2™ (Extreme. Speed. Precision. 2nd generation), our advanced second generation ranging technology, provides the fastest, most accurate ranging measurement based on target conditions. The laser analyzes multiple individual measurements to the target and calculates and displays the best possible result. Target variations such as reflectance, shape and color can affect the accuracy of a laser measurement, but E.S.P.2™ automatically assesses the conditions and improves the measurement up to 1/2 Yard Accuracy whenever possible from 5–125 yards. When this occurs, display readout precision will be refined to 1/10th yard.
GETTING STARTED
OPERATIONAL SUMMARY
While looking through the Tour® X Jolt®, depress the power button once to activate the display. Place the aiming circle (located in the center of the field of view) upon a target at least 5 yards away, depress and hold the power button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. The crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the laser is no longer being transmitted).Note: Once activated, the display will remain active and display the last distance measurement for 7 seconds. You can depress the power button again at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time with magnified lenses. The maximum time the laser is transmitted (fired) is 7 seconds. To re-fire, press the button down again.
ADJUSTING THE EYEPIECEThe Tour® X Jolt® is equipped with an adjustable eyepiece (+/- 2 Diopter Adjustment) that allows you to focus the display relative to the image. Simply rotate the eyepiece until the display is in focus.
DUAL DISPLAY (SELECTING RED OR BLACK DISPLAY)
The Tour® X Jolt® features Dual Display Technology, which lets you easily toggle between a bright red display featuring VDT or a crisp black display, based on lighting conditions or your preference. To select the red display, position the switch below the eyepiece so the red indicator is visible. To select the black display, position the switch so the black indicator is visible.
EXCHANGE TECHNOLOGY
Only available on the Tour X, Exchange Technology lets the golfer use Bushnell’s patented Slope Technology when the red faceplate is attached, and provides a USGA conforming device when the black faceplate is attached. For more details, see the “Pinseeker with Slope +/-” section.
DISPLAY INDICATORS
Your Tour® X Jolt® display incorporates the following illuminated indicators:
- PinSeeker™ Indicator (1)
- Aiming Reticle (2)
- Battery Life Indicator (3)
- Active Laser (4)
- Distance Displayed in Yards/Meters (5)
BATTERY LIFE INDICATOR
Battery Indicator:
- Full charge
- 2/3 battery life remaining
- 1/3 battery Life remaining
- Battery Indicator Blinks – Battery needs to be replaced and unit will not be operable.
INSERTING THE BATTERYRemove the Posi-Thread™ battery door by lifting the battery door tab and then rotating counter clockwise.Insert a CR2 3-volt lithium battery into the compartment negative end first, then replace the Posi-Thread™ battery door.Note: It is recommended that the battery be replaced at least once every 6 months.
ACTIVE LASERCrosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been released (i.e. the laser is no longer being transmitted).
PINSEEKER™ WITH JOLT ®Ever have trouble getting distance to the flag? This advanced mode allows easy acquisition of the flag without inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.For ease of use, the device will always be in PinSeeker™ Mode.
To use, align the aiming circle reticle onto the flag that you want distance to. Next, press and hold the POWER button and move the laser slowly over the flag or desired object until a circle surrounds the flag indicator. If the laser beam recognized more than one object (i.e. flag and background trees), distance of the flag will be displayed and a circle will surround the PinSeeker™ indicator informing the user that distance to the flag (i.e. closer object) is being displayed. The Jolt Technology provides two short bursts of vibration to confirm that the distance displayed is to the flag. There may be times when only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than one object was not acquired, a circle will not surround the flag indicator.
Tip: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that you are only displaying the closest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to the last mode used.
PINSEEKER™ WITH SLOPE +/-™When the red faceplate is attached, Bushnell’s patented Slope Technology is displayed. The Slope +/-™ mode will automatically compute an angle compensated range based upon distance and slope angle determined by the laser rangefinder and built-in inclinometer. This data is then combined with internal algorithmic formulas dealing with average club use and ball trajectories. The angle compensated range provides direction on how to play the shot (i.e. add distance if an incline, subtract distance if a decline). Switch to the black faceplate, and your Tour® X Jolt® conforms to USGA Rule 14-3, with the Slope angle compensated ranging feature removed.
HOW TO USE SLOPE +/-™
Once in this mode, you will see a “ – – – ” in the field of view informing you that you are in the Slope +/- Mode. Press the POWER button to obtain distance to the flag or other objects. Once the range is displayed, continue to hold the POWER button down for approximately 2 seconds while holding the aiming circle on the flag and keeping the unit as steady as possible so as to allow the inclinometer enough time to measure slope. Then release the POWER button. Once you have released the power button, a degree of angle and compensated range will be displayed beneath the standard distance.In the example on the next page, the true distance is 162 yards, slope is +4 degrees, and the compensated (“play-as”) range is 173 yards.
THE ADVANTAGE OF SLOPE +/-™The distance to flag A in the drawing below is 162 yards. It is also 162 yards to flag B although it is on a slope. However, if you were to play this hole as 162 yards, the ball (X) would fall short of the hole/flag because you did not take slope into account.
DISPLAY BRIGHTNESSThe bright red LED display dramatically improves contrast, clarity and light transmission while increasing brightness of the digital readout, making distance readings legible in low light environments. There are four intensity settings to choose from and this is the first setting within the SETUP menu. Press the MODE button for 3 seconds to get intothe SETUP menu. The existing brightness setting will be flashing (i.e. BRT1, BRT2, BRT3, or BRT4), pressing the MODE button will toggle between the four brightness settings. “BRT1” is the lowest intensity while “BRT4 ” is the brightest. Simply press the MODE button until the desired brightness setting is displayed and select by pressing and releasing the POWER button.
UNIT OF MEASURE OPTIONSThe Tour® X Jolt® can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the display. There are two measuring settings to choose from and this is the second setting within the SETUP menu. Look through the eyepiece, depress the “MODE” button (“B” Button on side of device) and hold it down for approximately 3 seconds to get into the SETUP menu. Depressing the MODE button will toggle through the brightness settings if the bright red LED display is selected. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned off. If you are changing from meters to yards, the opposite will occur. The Tour® X Jolt® will return to the last unit of measure setting used each time the unit is turned on.
PRODUCT CARE
CLEANINGGently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.
SPECIFICATIONS
| SPECIFICATIONS | |
| Dimensions | 1.5 x 4 x 3 inches |
| Weight | 8 oz. |
| Ranging Accuracy | Up to ½ yard accuracy from 5–125 Yards, +/- 1 yards accuracy from 126–1300 yards |
| Range | 5–1300 Yards / 5–1189 Meters |
| Magnification | 6x |
| Objective Diameter | 21 mm |
| Optical Coatings | Fully Multi-Coated |
| Display | Dual Display Technology™ |
| Power Source | 3-volt lithium (CR-2) |
| Field Of View | 393 ft. @ 1000 yards / 119 meters at 1000 meters |
| Extra Long Eye Relief | 16 mm |
| Exit Pupil | 3.5 mm |
| Includes case and strap | Yes |
TWO-YEAR LIMITED WARRANTY
Your Bushnell® laser rangefinder is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell® Authorized Service Department.Any return made under this warranty must be accompanied by the items listed below:
- A check/money order in the amount of $10.00 to cover the cost of postage and handling
- Name and address for product return
- An explanation of the defect
- Proof of Date Purchased
Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:
IN U.S.A. Send To:Bushnell® Outdoor ProductsAttn.: Repairs9200 CodyOverland Park, Kansas 66214
IN CANADA Send To:Bushnell® Outdoor ProductsAttn.: Repairs140 Great Gulf Drive,Unit B Vaughan, Ontario L4K 5W1
For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you may also contact Bushnell® at:
Bushnell Germany GmbH Eur Seropean vice Centre Mathias-Brüggen-Str. 80This warranty gives you specific legal rights.You may have other rights which vary from country to country. ©2015 Bushnell® Outdoor Products
TROUBLE SHOOTING TABLE
If unit does not turn on / display does not illuminate :
- Depress power button.
- Check and if necessary, replace battery. If unit does not respond to key presses, replace the battery with a good quality CR2 3-volt Lithium battery.
- Ensure the display is on the brightest setting while in sunlight. While pressing Power Button, cover the objective lenses to determine if the display is on. See the display brightness setting instructions (pg. 9).
If unit powers down (display goes blank when attempting to power the laser) :
- The battery is either weak or low quality. Replace the battery with a good quality CR2 3-volt Lithium battery.
If target range cannot be obtained :
- Make sure display is illuminated.
- Make sure that the power button is being depressed.
- Make sure that nothing, such as your hand or finger, is blocking the objective lenses (lenses closest to the target) that emit and receive the laser pulses.
- Make sure unit is held steady while depressing power button.
Note: The last range reading does not need to be cleared before ranging another target. Simply aim at the new target using the reticle, depress the power button and hold until new range reading is displayed. Specifications, instructions, and the operation of these products are subject to change without notice.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
FDA SAFETYClass 1 laser product in accordance with IEC 60825-1:2007.Complies with 21 CFR 1040.10 and 1040.11 for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.Caution: There are no user controls, adjustments or procedures. Performance of procedures other than those specified herein may result in access to invisible laser light.
References
[xyz-ips snippet=”download-snippet”]