The Box MBA1 active 2-way speaker User Manual

The Box MBA1 active 2-way
speaker User Manual

Musikhaus ThomannThomann GmbHHans-Thomann-Straße 196138 BurgebrachGermanyTelephone: +49 (0) 9546 9223-0E-mail: [email protected]Internet: www.thomann.de23.11.2020, ID: 480782

General information

This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual.

Our products and user manuals are subject to a process of continuous development. We therefore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de.

Further information

On our website (www.thomann.de) you will find lots of further information and details on the following points:

Notational conventions

This manual uses the following notational conventions:

LetteringsThe letterings for connectors and controls are marked by square brackets and italics.Examples: [VOLUME] control, [Mono] button.

DisplaysTexts and values displayed on the device are marked by quotation marks and italics.Examples: ‘24ch’, ‘OFF’.

Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.

Safety instructions

This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

DANGER!Danger for childrenEnsure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard!Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke!Never let children unattended use electrical devices.

DANGER!Electric shock caused by high voltages insideWithin the device there are areas where high voltages may be present. Never remove any covers.There are no user-serviceable parts inside.Do not use the device if covers, protectors or optical components are missing or damaged.

DANGER!Electric shock caused by short-circuitAlways use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.

CAUTION!Possible hearing damageThe device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage.Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use sufficient ear protectors.

NOTICE!Risk of fireDo not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.

NOTICE!Risk of fire due to incorrect polarityIncorrectly inserted batteries may destroy the device or the batteries.Ensure that proper polarity is observed when inserting batteries.

NOTICE!Operating conditionsThis device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations.Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately after it was exposed to temperature fluctuations (for example after transport at low outside temperatures).Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction.

NOTICE!Possible damage by leaking batteriesLeaking batteries can cause permanent damage to the device.Take batteries out of the device if it is not going to be used for a longer period.

NOTICE!Possible stainingThe plasticiser contained in the rubber feet of this product may possibly reactwith the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains.In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet.

NOTICE!Possible damage due to installation of a wrong fuseThe use of different types of fuses can cause serious damage to the unit. Fire hazard!Only fuses of the same type may be used.

Features

The device is characterized by the following features:

• mobile battery-powered 2-way active speaker box
• 8″ woofer
• 1″ full-range tweeter
• Class-D power stage
• 150 W RMS output power
• 3 preset modes: Music, speech and guitar
• 2 × XLR / 1/4″ phone jack combo socket for adjustable MIC / Line input
• 1 × RCA socket pair / 1 × 3.5 mm phone socket for stereo input
• 1 × XLR output socket
• Bluetooth

Installation and starting up

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.

Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.

NOTICE!Possible property damage by magnetic fieldsLoudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field.

The unit can be mounted on a tripod or set up on the floor or a sufficiently sized and stable surface, e.g. a wall bracket.

NOTICE!Use of standsWhen mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.

Comply with regulationsWhen installing and operating, make sure to follow the standards and regulations that apply in your country.

The speaker box has two 35 mm flanges for tripod mounting at different angles.

• The flange with 0° angle (rear position) is suitable for use in front of standing audiences.
• The flange with 7° angle (front position) is suitable for use in front of sitting audiences.

Connections and controls

Technical specifications

Further information

Plug and connection assignment

IntroductionThis chapter will help you select the right cables and plugs to connect your valuable equipment in such a way that a perfect sound experience is ensured.Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’ in poor transmission quality!

Balanced and unbalanced transmissionUnbalanced transmission is mainly used in semi-professional environment and in hifi use. Instrument cables with two conductors (one core plus shielding) are typical representatives of the unbalanced transmission. One conductor is ground and shielding while the signal is transmitted through the core.Unbalanced transmission is susceptible to electromagnetic interference, especially at low levels, such as microphone signals and when using long cables.In a professional environment, therefore, the balanced transmission is preferred, because this enables an undisturbed transmission of signals over long distances. In addition to the conductors ‘Ground’ and ‘Signal’, in a balanced transmission a second core is added. This also transfers the signal, but phase-shifted by 180°.Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise interference.

1/4″ TS phone plug (mono, unbalanced)

1/4″ TRS phone plug (mono, balanced)

Three-pole 1/8″ mini phone jack (stereo, unbalanced)

XLR plug (balanced)

RCA connection

Cleaning

Device componentsClean the device components that are accessible from the outside regularly. The cleaning frequency depends on the operating environment: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the device components.

• Clean with a dry soft cloth.
• Stubborn dirt can be removed with a slightly dampened cloth.
• Never use solvents or alcohol for cleaning.

Protecting the environment

Disposal of the packaging material

For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.Ensure that plastic bags, packaging, etc. are properly disposed of.Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Disposal of batteries

Batteries do contain some hazardous chemicals so they should not be thrown away with the normal household waste. They should be returned to the manufacturer for disposal or recycled elsewhere in accordance with your local regulations.Remove lithium batteries from the device before disposal. Protect used lithium batteries against potential short circuits, e.g. by covering the poles with adhesive tape. Dispose the built-in lithium batteries together with the device. Please check for an appropriate reception facility.

Disposal of your old device

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste.Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

The Box MBA1 active 2-way speaker User Manual – The Box MBA1 active 2-way speaker User Manual –