Ampeg MICRO-CL Bass Guitar Amplifier Mini Stack User Guide

MICRO-CLQuick Start Guide

What’s in the BoxMICRO-CL Amplifier, Power Cable, Quick Start Guide.

Hookup Diagrams

Standard SetupPA/Recording Setup

Front & Rear Panels

Front and Rear Panel Descriptions

  1. 0 dB Input: Connect a passive instrument to this Input jack.
  2. –15 dB Pad: Connect an active instrument to the Input jack.
  3. Master: Adjusts the overall input level.
  4. EQ: Boost or cut the level at certain frequencies to enhance the sound.
  5. Aux Level: Adjusts the Aux Input level.
  6. Aux Input: Input for an MP3 player or another music source.
  7. Phones Output: Combination playback of the 0 dB and -15 dB Inputs, and Aux Input.
  8. Power Switch/Power LED: Turns the power on or off. The LED indicates power on or off.
  9. Power Connector: IEC input socket for the power cable.
  10. Speaker Output: 1/4″ TS output for connecting speaker.
  11. Effects Loop: Connect the input and output of an external FX processor.
  12. Line Output: Feeds an external mixer or recording device.
  13. Speaker Input: 1/4″ TS input for connecting to MICRO-CL head.

Getting Started

  1. Read and understand the included “Important Safety Instructions.”
  2. Make sure the power switch is off before making any connections.
  3. Push the line cord securely into the amplifier’s IEC connector and plug the other end into a grounded AC outlet. The amplifier may accept the appropriate voltage as indicated near the IEC connector.
  4. Connect an instrument to the MICRO-CL Input jack with a 1/4″ instrument cable. Connect the amplifier to the to speaker cabinet with a 1/4″ TS (non-shielded) speaker cable.
  5. With the Level and Master controls fully off, turn on the amplifier by pressing the top edge of the power switch.
  6. While playing the instrument, adjust the Level and Master knobs to the preferred level.
  7. Adjust the EQ knobs to taste.

Technical Specifications

MICRO-CL
Output Power Rating 100W RMS  @ 8
Maximum Gain 59 dB @ 1 kHz
Power Requirements 100V AC, ~50–60 Hz, 85W120V AC, ~60 Hz, 85W220–230V AC, ~50–60 Hz, 85W
Amplifier Size (H x W x D) 7 x 12.2 x 10 in178 x 310 x 254 mm
Amplifier Weight 13.8 lb6.3 kg
Speaker Specs 2 x 10″
Cabinet Size (H x W x D) 13 x 24 x 11 in330 x 610 x 279 mm
Cabinet Weight 33.2 lb15.1 kg

All specifications subject to change

WARRANTY AND SUPPORT

Visit WWW.AMPEG.COM to…(1) …identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place.(2) …retrieve a full-version, printable OWNER’S MANUAL (English only) for your product.(3) …REGISTER your product.(4) …CONTACT Technical Support, or call 818-575-3600.

www.ampeg.comYamaha Guitar Group, Inc.26580 Agoura Road, Calabasas, CA 91302-1921 USAPart No. 40-00-0430 Rev. B

Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information

Unique Identifier: Ampeg MICRO-CL

Responsible Party – U.S. Contact Information: Yamaha Guitar Group, Inc.26580 Agoura RoadCalabasas, CA 91302-1921(818) 575-3600https://ampeg.com/

FCC Compliance Statement:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

There are various types of fuses, and replacing them with different types may cause malfunction, electric shock, or fire. Be sure to confirm you are replacing the course with electrical rating and specifications.

Each number and symbol represent the following:Example: T3AL250V1-T, 2 • A, 3 L, and 4 ■V  are shown below.

  1. Symbol indicating relative fusing time / current characteristics T: Time lag type, F: Fast-acting type.
  2. •A: Rated current
  3.  Symbol indicating the blocking capacity L: Low cutoff capacity, E: Medium cutoff capacity, H: High cutoff capacity.
  4. ■V: Rated voltage

© 2021 Yamaha Guitar Group, Inc. All rights reserved.Ampeg, the Ampeg logo, and SVT are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.

Serial No.: ____________________________________

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,