Universal Notebook Power Supply65 W00200000
Operating instruction
Explanation of warning symbols and notes
Risk of electric shockThis symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage. WarningThis symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks. NoteThis symbol is used to indicate additional information or important notes.
Package contents
- Universal notebook power supply unit
- 8notebook connectors
- Power cord
- These operating instructions 3. Safety instructions
- Use the product only for the intended purpose.
- Do not use the product in the immediate vicinity of heaters, other heat sources, or in direct sunlight.
- Ensurethereissufficient scope for heat dissipation and ventilation.
- Only use the article under moderate climatic conditions.
- Do not use the product in areas in which electronic products are not permitted.
- Do not use the product in a damp environment and avoid splashing water.
- Do not short-circuit the battery of the opened terminal device. Thereisarisk of explosion.
- Protect the product from dirt, moisture, and overheating and use it in dry environments only.
- Do not drop the product and do not expose it to any major shocks.
- Do not operate the product outside the power limits specified in the technical data.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
- Make sure that cables do not pose a tripping hazard or block emergency exits.
- Do not bend or crush the cable.
- As with all electrical products, this device should be kept out of the reach of children.
- Do not modify the device in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, adapter cable, or power cable is damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Start-up and operation
- Ensure that your notebook requires a supply voltage of 19 V(+/- 1Volt).
- You can find this information on the original power supply unit or in your terminal device’s operating manual. If necessary, ask the dealer who supplied your terminal device or contact your terminal device manufacturer’s support service.
- Do not use the universal notebook power supply unit if you are unable to definitively determine your terminal device’s supply voltage.
- Ensure that the notebook’s total power consumption does not exceed the power supply unit’s rated output of 65 W.
- Failure to comply with this may cause damage to the universal notebook power supply unit and the connected terminal device!
Note the instructions in your device’s operating manual.If these do not contain any instructions expressly to the contrary, proceed as follows:
- Do not use force to connect the notebook connector.
- Missing or lost notebook connectors can be requested via our support hotline or by visiting www.hama.com/adapter-service.Available connectors will be sent to you free of charge.
- Use the connector on the original power supply unit to select the appropriate notebook connector.
- Without connecting it to the power supply unit, determine the mechanical compatibility between the notebook connector and the connection socket on the terminal device.
- The connector must slide easily into the socket but should not exhibit too much play.
- Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch –if this is not available, unplug the power cord from the socket.
- If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
- Connect the appropriate notebook connector to the power supply unit’s DC connection cable.
- Connect the power cord to the power supply unit and your terminal device.
- Then connect the mains plug to a properly installed socket.
- When the power supply is active, the LED lights up to indicate that the power supply unit is ready for operation.
- The terminal device can now be used and switched on / charged.
Care and Maintenance
NoteDisconnect the product from the mains before cleaning.
- Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
- Ensure that no water is able to enter the product.
Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.
Technical data
Ambient temperature | 0°–40° C |
Specifications in accordance withRegulation (EU) 2019/1782 |
|
Manufacturer’sname or trademark, commercial registration number andaddress | Hama, HRA12159,Dresdner Str. 9, 86653 Monheim |
Model identifier | 00054188 /00200000 |
Input voltage | 100 –240 V |
Input AC frequency | 50 /60Hz |
Output voltage /Output current /Output power | 19.0 VDC/3.42 A/65.0 W19.0 VDC/3.14 A/59.7 W5.0 VDC/1.0 A/5.0 W |
Average active efficiency | 86.00% |
Efficiency at low load (10 %) | 80.60% |
No-load power consumption | 0.18 W |
Hama GmbH &CoKG86652 Monheim /Germany
Service &Support
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
002000000/07.21
References
[xyz-ips snippet=”download-snippet”]