Industry Canada Statement[For having a wireless function (WLAN, Bluetooth,…)]This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and EconomicDevelopment Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B) / NMB-003(B)IC Radiation Exposure Statement
[For having a wireless function (WLAN, Bluetooth,…)]This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm (7.8 inches) between the antenna & your body.NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING[For product having the wireless function using 5 GHz frequency bands]i. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;ii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 52505350 MHz and 5470-5725 Hz shall be such that the equipment still complies with the e.i.r.p. limit;iii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 57255850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; andiv. [for devices operating in the band 5250-5350 MHz having an e.i.r.p. greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated.Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Replacement of Battery
Installing and Using the ProductPlease read this manual carefully before operating your set and retain it for future reference.o view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.
A SoundbarC Wireless Subwoofer – Install it close to the soundbar.B Remote Control Receiver /D External Device – (Blu-ray player, game console, etc.) Status LED (Refer to below table)
Power on
Standby
OPTICAL /HDMI ARC
Bluetoothready
Bluetooth
HDMI IN
USB
Red blinking
Red
White
Blue blinking
Blue
White
White
Connect the soundbar to your TV via an optical cable or an HDMI cable.
If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the soundbar via an HDMI cable.
Connect to power in the following order: wireless subwoofer → soundbar. Then, turn on the soundbar. When the connection isautomatically established with the soundbar, the LED on the wireless subwoofer will light up in green.
Using the product with your TV1. Press the Function button repeatedly until the first LED light up in white among the three LEDs.2. On your TV’s settings set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
Connecting the product to your smartphone via Bluetooth1. Tap the Settings button on your smartphone and select.Turn on the Bluetooth function. ( )2. Press the Bluetooth pair button. After a moment, the second LED blinks in blue among the three LEDs.3. Find and tap the product on your smartphone. The product appears as “LG QP5W / QP5 (XX)”.
Connecting to the LG Sound Bar app1. Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.2. You can get more information regarding its use by selecting [Help] in [Setting].
If you see a red LED on the bottom of the wireless subwoofer, it means that the soundbar is not connected to the speaker. If this is thecase, connect them in the following order.
Press the Powerbutton on the soundbar to turn it off
Press the PAIRING button on the bottom of the wireless subwoofer. Check if each LED blinks green.– If you still see a red LED on the bottom of the wireless subwoofer, press and hold the button on the bottom of the subwoofer again.
Press the Power button on the soundbar to turn it on.
When the connection is established, you will see a green LED light on the bottom of the wireless subwoofer light up in green.♣ Keep the soundbar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wirelessinterference.
Design and specifications are subject to change without notice.
Google Play is a trademark of Google LLC.
Specification
Power consumption
Refer to the main label.AC adapter
Model: DA-65F19
Manufacturer: Asian Power Devices Inc.
Input: 100 – 240 V ~ 50 – 60 Hz
Output: 19 V 3.42 A
Dimensions (W x H x D): Approx. 296.0 mm x 59.9 mm x 126.0 mm (11.7 inch x 2.4 inch x 5.0 inch)Bus Power Supply (USB): 5 V 500 mAAmplifier (Total RMS Output power): 320 W RMSOPEN-SOURCE SOFTWARE NOTICE INFORMATIONTo obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that is contained in this product, please visithttps://opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers, and copyright notices are available for download.LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
QP5W / QP5
LG Customer Information Center1-888-542-2623CANADARegister your product Online!www.lg.com