P43047741 Cat Cave Dome anko
Contents
Instructions
Step 1. Screw the connecting rods ( B x 8 pcs ) into the boards ( No.1 & No.2 ) separately. Then install the acrylic cover ( No.5 ) in middle of the board ( No.1 ) with screws (C x 4pcs ) by following the pre drill holes. Please refer to the image below.
Step 2. Insert the boards ( No.3 x 2 pcs ) to the connecting rods and insert & lock with nuts ( A x 4pcs ) . Please note to rotate nuts A by 90°after inserting into holes to make sure it is locked.
Step 3.Insert boards ( No.4 x 4 pcs ) into the grooves on the bottom of board ( No.2 ).
Step 4.Put on the top board ( No . 1 ). Please make sure the grooves and holes are in right position, insert and then lock with nuts ( A x 4pcs ) from the side holes.Please note to rotate nuts A 90° after inserting into holes to make sure it is locked.
WARNING:Pet toy – Not intended for children.It is the responsibility of the pet owner if this toy is suitable for their pet’s style of play. No pet toy is indestructible and can be damaged during play. For your pet’s safety, inspect regularly and remove if damaged. Always supervise your pet during play.
[xyz-ips snippet=”download-snippet”]