IKEA 00296681 FIXA Screw Driver User Guide

Table of Contents

Design and QualityIKEA of Sweden

Original instructions

FIXA screwdriver/drill, Li-Ion 7.2V

TECHNICAL SPECIFICATIONS

Voltage/battery type: 7,2 V lithium-ion battery.Max. rpm (no-load speeds): 0-400 rpm.Max. torque: 5 Nm.Holder for screwdriver bits: 6.35 mm (1/4″).Chuck:10 mm (3/8″), keyless, quick-fit/quickrelease chuck.Charger: Local mains voltage.Charging time: 3-8 hrs.Other information: Adjustable torque.Vibration (according to EN 62841-1, EN 62841-2-1)Drilling into metal < ah,D = 0.945 m/s², K=1.5 m/s². ah=0.564 m/s², K=1.5 m/s.Noise (according to EN 62841-1) Noise pressure levelLpa = 63.4 dB (A), Kpa = 5 dB (A)Noise power level Lwa = 74.4 dB (A),Kwa = 5 dB (A)

LIST OF FEATURESThe numbering of the product features shown refers to the illustration of the screwdriver/drill on the graphic page.

Keyless chuck
Torque regulator
Selector for rotation right/left
Infinitely variable speed control/trigger
Charger
Charger plug
Charger socket
Charge indicator
Holder for screwdriver bit

AREAS OF USEThis cordless screwdriver/drill may be used for drilling in wood, plastic and soft metal materials, and for tightening/loosening screws. The supplied drill bits are suitable for these applications. Any other application with these drill bits is not recommended.

This appliance is not intended for use by persons (including children) with reduced sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

GENERAL SAFETY INSTRUCTIONS

General safety instructions for power tools

WARNING!Read all safety warnings and all instructions.Failure to follow all the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Work area safetya. Keep work area clean and well lit. Cluttered and dark areas invite accidents.b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gasses or dust. Power tools create sparks which may ignite the dust of fumes.c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safetya. Power tool plugs must match the outlet.Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safetya. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.c. Prevent unintentional starting: Ensure that the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.h. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and carea. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.c. Disconnect the plug from the power source and/or the battery pack before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.i. Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact with hidden wiring or its own cord. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Battery tool use and carea. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.b. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.c. When battery pack is not in use, keep it away from other metal objects, like paperclips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Servicea. Have your power tool serviced by a qualified repair person using only identical replacements parts. This will ensure that the safety of the power tool is maintained.

MACHINE-SPECIFIC SAFETY INSTRUCTION

Safety warnings for drills and screwdriversUse appropriate detectors to determine if utility lines are hidden in the work area or call your local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may cause an electric shock.Switch off the power tool immediately when the tool insert jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when:

the power tool is subject to overload
or it becomes wedged in the workpiece.

Hold the machine with a firm grip. High reaction torque can briefly occur while driving in and loosening screws.Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.Avoid unintentional switching on. Ensure the trigger is in the off position before inserting battery pack. Carrying the power tool with your finger on the trigger or inserting the battery pack into power tools that have the switch on invites accidents.

Safety Warnings for batery chargers

For indoor use only.Double insulated.

Keep the battery charger away from rain or moisture. Penetration of water in the battery charger increases the risk of an electric shock.Do not charge other batteries. The battery charger is suitable only for charging the batteries that were supplied with your power tool. Otherwise there is danger of fire and explosion.Keep the battery charger clean. Contamination can lead to danger of an electric shock.Before each use, check the battery charger, cable and plug. If damage is detected, do not use the battery charger. Never open the battery charger yourself. Have repairs performed only by a qualified technician. Damaged battery chargers, cables and plugs increase the risk of an electric shock.Do not operate the battery charger on easily inflammable surfaces (e. g., paper, textiles, etc.) or surroundings. The heating of the battery charger during the charging process can pose a fire hazard.Children should be supervised to ensure that they do not play with the battery charger.Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Products sold in AUS only: Use a residual current device (RCD) with a rated residual current of 30 mA or less.

VIBRATION INFORMATION

Vibration levelThe vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN62841. It may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned in this manual. However, using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level.An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job, as this may significantly reduce the exposure level over the total workingperiod.Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organising your work patterns.

ASSEMBLY

Before any work on the machine (e.g. maintenance, tool change, etc) as well as during transport and storage, set rotational direction switch to the centre position. Unintentional actuation of the trigger can lead to injuries.Charging your screwdriver/drillWhen the charger is connected to the electricity supply, the red diode on the screwdriver/drill lights up. The diode lights up while the battery is being charged (8).Under normal conditions of use the screwdriver can be recharged several hundred times.ATTENTION! The recharging process generates heat in the battery.

Note: The battery that is supplied with the screwdriver has been charged for test purposes only and must be fully charged before first time use. First read the safety instructions and then follow the loading instructions. Insert the charger plug into the socket in the screwdriver/drill. Then connect the charger to the electricity supply. Make sure that there are no knots or sharp bends in the cable.The charger’s transformer and the battery have been designed to be used together.

NEVER use this charger to recharge cordless tools or batteries from other manufacturers.

The battery will gradually lose its charge over a period of time, even if the tool is not used. The lithium-ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the machine is switched off by means of a protective circuit: The tool no longer rotates.

WARNING! Do not continue to press the forward/reverse switch after the machine has been automatically switched off. The battery can be damaged.

Keyless chuck Your drill has a keyless chuck so that you can simply tighten or release drill/driver bits. To open/close the chuck hold the rear ring and rotate the front sleeve.

WARNING! Recharge the battery on a non-flammable surface. Do not recharge the battery for more than eight hours. The red diode will go out when the battery has been fully loaded.Disconnect the cable and store the charger in a suitable place when it is not in use.It is not advisable to recharge the battery in temperatures below freezing.

INSTRUCTIONS FOR USE

Note: Sparks may be visible through the slots in the motor housing during operation. The sparks are a normal reaction of the motor when in use and are created by the components inside the motor moving against each other. The function of the power tool is not affected by this. We do however recommend not to use the power tool near any flammable liquids, gases or dust, which the sparks may ignite.Regulating the shaft speedIt is possible to regulate shaft speeds from zero to maximum by altering the pressure applied to the trigger.

Reversing the direction of rotationYou can reverse the direction of rotation by using the selector above the trigger. To lock the trigger, set the selector to the mid position between the right and left options.Adjusting the tightening momentTurn the torque regulator to the desired position. Settings 1-15 are used for tightening/loosening screws (the higher the value, the greater the tightening moment). Select the drill symbol before using the tool for drilling.

Keyless chuckYour drill has a keyless chuck so that you can simply tighten or release drill/driver bits. To open/close the chuck hold the rear ring androtate the front sleeve.

WARNING: RISK OF TRAPPINGDo not hold the front sleeve of the chuck with one hand at the same time as you open or close the jaws of the chuck with the help of the drill/driver´s motor.Mounting drill/driver bitsSet the drill/driver´s trigger in mid position. Adjust the chuck until the opening is slightly larger than the shaft of the drill bit that you wish to use. Insert the drill bit into the chuck. Tighten the chuck against the drill as described above (Keyless chuck).

MAINTENANCE AND CLEANING

Before any work on the machine (e.g. maintenance, tool change, etc) as well as during transport and storage, set the selector for rotation right/left to the centre position. Unintentional actuation of the trigger can lead to injuries.For safe and proper working, always keep the machine and ventilation slots clean.

ENVIRONMENTAL DISPOSAL INSTRUCTIONSInformation (for private households) about the environmentally sound disposal of electrical and electronic equipment in accordance with the WEEE directive (Waste Electrical and Electronic Equipment).

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

ADDITIONAL INFORMATION

Manufacturer: IKEA of Sweden AB, PO Box 702, ÄLMHULT, S-343 81, Sweden

Importer (authorized by the manufacturer organization): LLC “IKEA TORG”, bld. 1, microraion IKEA, Khimki, Moscow region, 141400 Russia, tel.: +7(495) 737-5301, fax: +7(495) 737-5324

Date of manufacture specified in the format DD.MM.YY on the label or packageProduct service life: 10 years

Regarding the quality of IKEA products contact seller: LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1 through the form on website http://www.IKEA.ru/, by phone 8 (800) 234-55-66 or to the IKEA Service department in any IKEA store.