Do not use the chair outside its intended use or load limit.
TC-Series meets or exceeds requirements for safety and durability with the following tests:For information on your new gaming chair’s warranty, please visit: www.corsair.com/warranty
TC-SERIES BOX CONTENTS
Note: There are small variations between the TC-Series. This graphic is simply meant to show the basics of what is included.
ASSEMBLING YOUR TC-SERIES GAMING CHAIR
Insert casters into the base, then turn over and insert the larger side of the gas lift into the base.
Using the included G1 & G2 screws, attach the armrests, while using the G screws to attach the reclining mechanism.Note: Ensure the mechanism’s hinge is situated at the rear of the seat.
Using the G screws, attach the seatback to the hinge.
Set the assembled seat and seat back onto the gas lift.
Sit back and relax!
OPERATING YOUR TC-SERIES GAMING CHAIR
WARNING: Improper use of the chair may cause damage to the chair, its components, or result in personal injury. Please use this chair in a non-abusive manner. CORSAIR is not responsible for damages or injury due to failure to adhere to safety guidelines and/or misuse of the product.
Seat Tilt AdjustmentSitting in the seat, pull the left lever up to unlock the tilt position. Once your desired tilt angle is found, push the lever back down to lock the angle into place.
Seat Tilt Tension To increase the tilt tension, while sitting on the chair, rotate the tilt tension knob underneath the front of the seat counterclockwise. To decrease tilt tension, turn the knob clockwise.
Seat Height Adjustment Raising chair: While sitting, but supporting most of your own body weight, pull the lever on the right. To lower, rest your full weight on the chair while pulling the lever and release the lever when your desired height is reached.