SmartStack
| Maxtec | phone: (800) 748.5355 |
| 2305 South 1070 West | fax: (801) 973.6090 |
| Salt Lake City, Utah 84119 | email: [email protected] |
| USA | web: www.maxtec.com |
NOTE: The latest edition of this operating manual can be downloaded from our website at www.maxtec.com
CAUTION: Federal law restricts this device to be sold by or on the order of a medical professional.
WARNINGS
◆ This device is not MRI compatible.◆ Never exceed 100 lbs on this device.
DO NOT attach more than 11 lbs (5kg) on one single hook. Distribute weight evenly.DO NOT mount equipment that places the load more than 5 inches off-center of the pole.DO NOT mount more than 50 lbs on the upper portion of this device.◆ Use caution when rolling heavily loaded devices, especially on uneven surfaces.◆ This product should only be used under proper supervision from a healthcare professional.DO NOT autoclave.DO NOT stand on or ride this device.◆ Brakes may not stop IV poles on all surfaces.◆ Follow the order of assembly as directed.◆ Use caution when adjusting pole height with heavy objects mounted above hands.◆ If components are damaged or missing, contact your dealer immediately.DO NOT use substitute parts unless provided by Maxtec or an authorized representative.◆ Failure to adhere to these warnings can result in severe injury.◆ Maxtec assumes no responsibility for any damage or injury caused by improper installation, assembly or use of this product.◆ Use caution if the pole is fully loaded. Product may tip.◆ Use caution around stairwells.
CLEANING◆ Clean often using a cloth moistened with 65% isopropyl alcohol/water solution or germicidal wipe.◆ Clean the entire device before use.
MAINTENANCE◆ Maxtec recommends inspecting this device for proper assembly and functions at least once a year.◆ Inspect pole/base bolt, casters, and top hook and tighten if necessary.◆ Ensure the pole height adjustment mechanism functions properly.◆ If the device does not function properly or is missing components, remove it from service and contact Maxtec or an authorized representative.
WARRANTY◆ 4-year limited warranty on manufactured defects.
WWW.MAXTEC.COM • (800) 748-5355
This page intentionally left blank
2305 South 1070 WestSalt Lake City, Utah 84119(800) 748-5355www.maxtec.com
References
[xyz-ips snippet=”download-snippet”]