FEIT electric Deco Table Top Grow Lights Installation Guide

Model/Item It GLP17/BfTABLE/14WLED GLP17/W/TABLE/14WLEDIMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDEDeco Table Top Grow Lights

Questions, problems, missing parts? Before returning to the store, call Feit Electric Customer Service 8 a.m. – 5 p.m., PST, Monday – Friday1-866-326-BULB (2852)FEIT.COMWe appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Table Top Grow Light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric.

Safety Information

Read and understand all Safety and Operating instructions in this manual before using this product.Follow all safeguards stated in the manual, in addition to normal safety precautions in working with electrical devices. When using tabletop grow lights, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Feit Electric Company, 4901 Gregg Road, Pico Rivera, CA 90660. www.feit.com, 1-800-543-3348.

IMPORTANT SAFETY INSTRUCTIONS CAUTION:This portable light-emitting diode LED luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug.

Limited Warranty

This product is warranted to be free from defects in workmanship and materials for up to 2 years from the date of purchase. If the product fails within the warranty period, please contact Feit Electric at [email protected], visit feit.com/icontact-us or call 1-866 326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

Pre-Assembly

HARDWARE INCLUDED NOTE: Hardware not shown to actual size.

Installation

1. Slide the post (BB) into the top light (AA).
2. Tighten screws (DD) using the supplied alien wrench (EE).
3. Slide the other end of the post (BB) into the base (CC).
4. Tighten screws (DD) using the supplied alien wrench (EE).

Using Grow Lights

Why Use LED Grow Lights?

• Grow plants during the winter to get a head start on Spring vegetable plants
• Grow plants that are out of season throughout the year
• Grow plants anywhere, including garages, basements, closets, kitchens or warehouses

Plants in VegetativeGrowth Stage

• The recommended growth cycle is 16 hours of light during the vegetative growth stage (only applies to the tabletop light). 16 hours is the default vegetation timing schedule. This light cycle will create an environment that mimics the photoperiod in the summer with long days. It is during the vegetative growth stage that cloning, transplanting, pruning, and bending are all initiated.
• Most plants will need 4-6 weeks in the vegetative cycle before reaching the start of the flowering stage.

Plants in the Budding and Flowering Growth Stage

• Pre-flowers are the first indication that the plant is ready to move into the budding and/or flowering stage of growth.
• The pre-flowers grow at branch internodes just behind the leaf spur typically around the fourth week of vegetative growth, when the plant is 6-8 weeks old.
• When you start seeing pre-flowers forming, this means that the plants are ready to go into the flowering stage. The pre-flower looks like a regular female flower with white fuzzy pistils. The pre-flowering can take from 1-2 weeks.
• Wait to induce flowering until pre-flowers have appeared. Induce flowering by switching your light cycle to 12 hours of uninterrupted darkness and 12 hours of light.

User Interface

WWW.FEIT.COMPlease contact 1-800-543-3348 for further assistance.