For The ON-THE-GO Pet™INSTRUCTION MANUALPRO PAWTY FOR CATS™PG4625SCC/PG4625ESC
To see our full line of products, visit us online at: www.petgearinc.comCUSTOMER SERVICE HELP DESK[email protected]Toll-Free 877-752-9123 – Eastern Standard Time 8am-3pm, Monday through Friday
PARTS LIST
Check that you have all the parts shown BEFORE assembling your product.If any parts are missing, call Customer Service.
CRATE SET UP
Step 1. Open both sides of the wireframe.
Step 2. Insert wire into connector near the center of front and back sides.
Step 3. Velcro inner panel to support wire and velcro all tabs along sides to secure the cover to the frame.
Step 4. Place Pro Pawty on litter tray mat.
Step 5. Unzip door to acess litter box for easy cleaning.
PET GEAR PRO PAWTY FOR CATS PG4625SCC/PG4625ESC
TIPS FOR GETTING CATS TO USE PRO PAWTYOnce the Pro Pawty is assembled you may want to leave the front door unzipped for a day or two, just to make sure your cat knows where their litter box is. After the cat uses the litter box inside the Pro Pawty a few times, they should be comfortable using it and the zippered door can be closed.AVOIDING SUFFOCATION HAZARDSNever use plastic shipping bags or another plastic film as pad covers not sold and intended for that purpose. They can cause suffocation. This product is not intended for commercial use.SETTING UP THE CRATETHIS PRODUCT REQUIRES ADULT ASSEMBLY.Be sure the crate is completely set up before use.Always follow the instructions in the product instructions to set up the crate.Before each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges.Do not use the crate if any parts are missing or broken.Call PET GEAR at 1-877-752-9123 for replacement parts. Use only PET GEAR replacement parts.Visit our website www.petgearinc.com to view or download the product instructions.Do not substitute parts.
WARNING!FOR PETS ONLY.Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature, or untrained animals. Do not Use neat and open or exposed names.Failure to follow these warnings and the instructions could result in serious injury or death.
REPLACEMENT PARTS
Use onlyPET GEAR replacement parts.Please have your model number ready before calling.http://www.petgearinc.com/main.asp?sel=2You can also request parts:
192 Sheldon Avenue West Rutland, VT 05777 877-752-9123www.petgearinc.comPET GEAR PRO PAWTY FOR CATSPG4625SCC/PG4625ESC
References
[xyz-ips snippet=”download-snippet”]