HYPERX B08NTYB4M7 Cloud II-wireless Gaming Headset User Guide

HYPERX B08NTYB4M7 Cloud II-wireless Gaming Headset

Overview

A. Mic mute/mic monitoring buttonB. USB charge portC. Microphone portD. Status LEDE. Power button / 7.1 Surround Sound buttonF. Volume wheelG. Detachable microphoneH. Microphone mute LEDI. USB adapterJ. Wireless pairing pin holeK. Wireless status LEDL. USB charge cable

Usage

  1. Connect the wireless USB adapter to your device
  2. Power on the headset

Setting up with PC

Right click speaker icon > Select Open Sound settings > Select Sound control panel

Playback Device
  1. Set Default Device to “HyperX Cloud II Wireless”
  2. Right click on “HyperX Cloud II Wireless” and click on Configure.Select 7.1 Surround to configure your setup and click next.
Recording Device

Set Default Device to “HyperX Cloud II Wireless”

Setting up with PlayStation 4

  1. Connect the wireless USB adapter to your device
  2. Power on the headset

Settings > Devices > Audio DevicesInput Device: USB Headset “HyperX Cloud II Wireless”Output Device: USB Headset “HyperX Cloud II Wireless”Output to headphones: All Audio

Status LED

STATUS LED
Pairing Flash Green and Red every 0.2s
Searching Slow breathing Green
Connected* 90% — 100%: Solid Green
15% — 90%: Blinking Green
< 15%: Blinking Red

*Battery level indication

Mic mute / mic monitoring button

  • LED On – Mic muted
  • LED Off – Mic active
  • Hold for 3 seconds to toggle mic monitoring on/off

Power button / 7.1 Surround Sound

  • Power on/off – Hold power button for 3 seconds
  • Press to toggle 7.1 Surround Sound on/of

Volume wheel

Scroll up and down to adjust volume level.WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Charging

It is recommended to fully charge your headset before first use.

STATUS LED

CHARGE STATUS

Solid Green Fully Charged
Breathing Green 15% — 99%
Breathing Red < 15%
Wired Charging

HyperX NGENUITY Software

hyperxgaming.com/ngenuity

Questions or Setup Issues?

Contact the HyperX support team or see the user manual at : hyperxgaming.com/support/headsets

ANATEL ID: 14135-20-07196ANATEL ID: 14212-20-07196

HyperX is a division of Kingston.THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE©2021 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA.All rights reserved. All registered trademarks and trademarks are the property of their respective owners.Kingston Technology Europe Co LLP, Kingston Court, Brooklands Close, Sunbury–on–Thames, Middlesex, TW16 7EP, UK.Kingston Technology International Ltd, Stratus House, College & Business Technology Park, Blanchardstown Road North, Dublin, D15 PEC4, Ireland

[xyz-ips snippet=”download-snippet”]


Posted

in

by