JLAB 615987 Epic Sport2 Wireless Earbuds User Manual

JLAB 615987 Epic Sport2 Wireless Earbuds User Manual

BLUETOOTH PAIRING

  1. Turn on the Bluetooth in your device settings.
  2. Press and hold button for 8 seconds. Release.Light will blink red and blue to indicate pairing mode.
  3. Select “JLab Epic Sport” in your device settings to connect Light will slow blink blue when Bluetooth is paired.

RECURRING USE

Once JLab Epic Sport 2 has initially paired to your device, the earbuds will auto-connect to your Bluetooth device when powered back ON.(Follow BUTTON FUNCTIONS instructions)

CHARGING

Open USB door and connect the cable to a computer or 5v (or less) power source to charge.

BUTTON FUNCTIONS

  • VOLUME UP:Quick press
  • TRACK FORWARD:Press & hold 2 seconds
  • POWER ON:Press &hold 3 seconds
  • POWER OFF:Press & hold 5 seconds
  • PLAY / PAUSE / ANSWER / HANG UP:Quick press
  • BLUETOOTH PAIR:Press & hold 8 seconds (see Bluetooth Pairing)
  • ACTIVATE GOOGLE / SIRI:Click twice
  • VOLUME DOWN:Quick press
  • TRACK BACKWARD:Press & hold 2 seconds

Quick press both buttons for different EQ settings(Epic Sport 2 will cycle 3 EQ settings)

EQUALIZER MODES

  • JLab SIGNATURE(One Beep)JLab C3™ signature sound with amplified bass and vocals
  • BALANCED(Two Beeps)Even sound with no additional enhancements
  • BASS BOOST(Three Beeps)Amplified bass and sub-bass

VOICE PROMPTS

  • “HELLO” = Power is ON.
  • “BATTERY FULL” = 100-75%
  • “BATTERY MEDIUM” = 75-25%
  • “LOW BATTERY” = Less than 25%
  • “READY TO PAIR”JLab Epic Sport 2 earbuds are ready to connect to your Bluetooth device.
  • “YOU’RE CONNECTED”JLab Epic Sport 2 is connected to your Bluetooth device and ready for use.
  • “GOODBYE” = Power turning OFF.

FITTING

Try various ear tips and Cush Fins to find the best fitRotate the earbud into ear canal and bend the Memory Wire to desired position.

CABLE CLIP USE

  1. Attach optional cable holder to tighten or loosen the cable during use.
  2. Insert the optional cable clip 3 to the back of the cable holder.
  3. Open the cable clip and attach to apparel.

CONNECTION TROUBLESHOOTING

I DO NOT SEE JLAB EPIC SPORT IN MY DEVICE

  1. Turn Bluetooth off and then back on in device settings.
  2. If you still do not see JLab Epic Sport, repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.

JLAB EPIC SPORT 2 DOES NOT RECONNECT TO MY DEVICE AFTER POWERING ON

  1. In device settings, forget the JLab Epic Sport.
  2. Turn Bluetooth off then back on in device settings.
  3. Repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.

BLUETOOTH IS CONNECTING TO AN UNWANTED DEVICE

Note: The JLab Epic Sport 2 can remember up to 8 devices. It will try to auto-connect to last device used.

  1. If you have more than one device that was connected to JLab Epic Sport 2, turn OFF Bluetooth on unwanted devices and turn ON Bluetooth on chosen device.

CAUTIONS

  • Avoid getting moisture or liquids into the tip of the earbuds or charging port.
  • Avoid extreme heat, cold, and humidity.
  • Avoid dropping or crushing the earbuds, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
  • Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
  • If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
  • If you experience regular discomfort while using this product, discontinue use and consult your physician.
  • We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphonesJLab Audio + Burn-in Tool

We love that you are rocking JLab Audio!We take pride in our products and fully stand behind them.

YOUR WARRANTYAll warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage

CONTACT USReach out to us at [email protected]or visit jlabaudio.com/contact

REGISTER TODAYjlabaudio.com/register  product updates | how-to tips FAQs & more

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,